A company is configuring a VxRail cluster in the initialization wizard. The administrator needs to set the cluster networking. The wizard shows a warning that the vSAN network MTU is set to 1500, but the physical switches support jumbo frames. What should the administrator do?

Change the vSAN network MTU to 9000 to match the switch capability.

Set the MTU to 9000 for all networks, including management and vMotion.

Leave the MTU at 1500 to avoid potential issues.

Disable jumbo frames on the switches to match the current MTU.

After the VxRail initialization completes, the administrator notices that the vCenter Server is not showing the VxRail cluster in the inventory. The administrator has logged in to the vCenter Server and can see the hosts, but the cluster is not listed. What should the administrator do?

Re-run the initialization wizard to recreate the cluster.

Add the hosts to a new cluster manually.

Restart the vCenter Server services.

Check the VxRail Manager to see if the cluster is registered.

A company is preparing to deploy a VxRail cluster. The administrator has the following network information: management VLAN 10, vSAN VLAN 20, vMotion VLAN 30. The storage team has provided a storage pool with 10 TB capacity. The cluster will have 4 nodes. What is the minimum number of IP addresses required for the management network?

4 IP addresses, one for each node's management NIC.

8 IP addresses, one for each node's management and vSAN NIC.

6 IP addresses, one for each node plus one for VxRail Manager and one for vCenter Server.

12 IP addresses, one for each node's management, vSAN, and vMotion NIC.

A company is deploying a VxRail cluster with 8 nodes. The administrator has the following constraints: the management network must be on VLAN 10, and the vSAN network must be on VLAN 20. However, the network team has only provided 5 IP addresses for the management network. The cluster will also include a VxRail Manager and a vCenter Server. What should the administrator do?

Reduce the number of nodes to 3 to fit the IP addresses.

Use the same IP address for the VxRail Manager and vCenter Server.

Request additional IP addresses from the network team.

Use the 5 IP addresses and assign the VxRail Manager and vCenter Server to the vSAN network.

During the VxRail initialization, the administrator is deploying the vCenter Server appliance. The wizard asks for the vCenter Server SSO domain. The company's Active Directory domain is 'corp.local'. What should the administrator enter for the SSO domain?

Leave it blank to use the default.

Dell VxRail Deploy v2

Domain 6Objective 1

Perform a VxRail Initialization with a VxRail Managed vCenter Server VXRAIL-DEPLOY-V2 Practice Questions (Page 2)

Part of the Deploying the VxRail Cluster domain, which accounts for 24% of the VXRAIL-DEPLOY-V2 exam.

23questions here

5free pages

5concepts

24%of the exam

Questions 6–10

6application · medium
A company is configuring a VxRail cluster in the initialization wizard. The administrator needs to set the cluster networking. The wizard shows a warning that the vSAN network MTU is set to 1500, but the physical switches support jumbo frames. What should the administrator do?
Select an answer first
7expert · hard
After the VxRail initialization completes, the administrator notices that the vCenter Server is not showing the VxRail cluster in the inventory. The administrator has logged in to the vCenter Server and can see the hosts, but the cluster is not listed. What should the administrator do?
Select an answer first
8application · medium
A company is preparing to deploy a VxRail cluster. The administrator has the following network information: management VLAN 10, vSAN VLAN 20, vMotion VLAN 30. The storage team has provided a storage pool with 10 TB capacity. The cluster will have 4 nodes. What is the minimum number of IP addresses required for the management network?
Select an answer first
9expert · hard
A company is deploying a VxRail cluster with 8 nodes. The administrator has the following constraints: the management network must be on VLAN 10, and the vSAN network must be on VLAN 20. However, the network team has only provided 5 IP addresses for the management network. The cluster will also include a VxRail Manager and a vCenter Server. What should the administrator do?
Select an answer first
10application · medium
During the VxRail initialization, the administrator is deploying the vCenter Server appliance. The wizard asks for the vCenter Server SSO domain. The company's Active Directory domain is 'corp.local'. What should the administrator enter for the SSO domain?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to VXRAIL-DEPLOY-V2

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “VXRAIL-DEPLOY-V2” is a trademark of its owner, used for identification only.

Perform a VxRail Initialization with a VxRail Managed vCenter Server VXRAIL-DEPLOY-V2 Practice Questions (Page 2)

Questions 6–10

A company is configuring a VxRail cluster in the initialization wizard. The administrator needs to set the cluster networking. The wizard shows a warning that the vSAN network MTU is set to 1500, but the physical switches support jumbo frames. What should the administrator do?

After the VxRail initialization completes, the administrator notices that the vCenter Server is not showing the VxRail cluster in the inventory. The administrator has logged in to the vCenter Server and can see the hosts, but the cluster is not listed. What should the administrator do?

During the VxRail initialization, the administrator is deploying the vCenter Server appliance. The wizard asks for the vCenter Server SSO domain. The company's Active Directory domain is 'corp.local'. What should the administrator enter for the SSO domain?

Keep studying — Deploying the VxRail Cluster