A media company is deploying IPTV to 2000 receivers across a campus. The video source sends a single stream to 239.1.1.10. The network team wants to ensure that only interested receivers consume bandwidth on access links. Which two features must be enabled on the Dell OS10 access switches to achieve this?

IGMP snooping and IGMP querier on the access VLAN

PIM dense-mode and IGMP snooping on the access VLAN

IGMP snooping and PIM sparse-mode on the access VLAN

IGMP snooping and static multicast MAC entries on the access VLAN

A university is deploying a lecture capture system that streams video to 500 student devices. The network team wants to use multicast to minimize bandwidth. The students' devices are on multiple VLANs. What must be configured on the Dell OS10 switches to allow multicast to cross VLAN boundaries?

Enable IGMP snooping on all VLANs and configure static multicast MAC entries.

Enable PIM dense-mode on all access ports.

Enable multicast routing with PIM on the Layer 3 interfaces and IGMP on the access VLANs.

Configure a multicast VLAN and place all receivers in that VLAN.

A data center is deploying a new multicast application. The application uses a group address of 239.255.1.1. The network team wants to ensure that the multicast traffic does not leave the data center. What should be configured on the Dell OS10 switches?

Configure an ACL to block the group address on the WAN interfaces.

Configure the group as a dense-mode group, which does not cross routers.

Set the TTL of the multicast packets to 1 on the source.

Use a group address in the 224.0.0.0/24 range, which is link-local.

Dell PowerSwitch Data Center Deploy

Domain 6Objective 3

Multicast POWERSWITCH-DATA-CENTER-DEPLOY Practice Questions (Page 1)

Part of the Data Center Technologies domain, which accounts for 30% of the POWERSWITCH-DATA-CENTER-DEPLOY exam.

24questions here

5free pages

6concepts

30%of the exam

Questions 1–5

1foundation · easy
Which IGMP version introduced source-specific multicast (SSM) support and is commonly used in modern networks?
Select an answer first
2application · medium
A media company is deploying IPTV to 2000 receivers across a campus. The video source sends a single stream to 239.1.1.10. The network team wants to ensure that only interested receivers consume bandwidth on access links. Which two features must be enabled on the Dell OS10 access switches to achieve this?
Select an answer first
3foundation · easy
Which OS10 command displays the IGMP snooping state and group membership on a switch?
Select an answer first
4application · medium
A university is deploying a lecture capture system that streams video to 500 student devices. The network team wants to use multicast to minimize bandwidth. The students' devices are on multiple VLANs. What must be configured on the Dell OS10 switches to allow multicast to cross VLAN boundaries?
Select an answer first
5expert · medium
A data center is deploying a new multicast application. The application uses a group address of 239.255.1.1. The network team wants to ensure that the multicast traffic does not leave the data center. What should be configured on the Dell OS10 switches?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to POWERSWITCH-DATA-CENTER-DEPLOY

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWERSWITCH-DATA-CENTER-DEPLOY” is a trademark of its owner, used for identification only.

Multicast POWERSWITCH-DATA-CENTER-DEPLOY Practice Questions (Page 1)

Questions 1–5

Which IGMP version introduced source-specific multicast (SSM) support and is commonly used in modern networks?

Which OS10 command displays the IGMP snooping state and group membership on a switch?

A university is deploying a lecture capture system that streams video to 500 student devices. The network team wants to use multicast to minimize bandwidth. The students' devices are on multiple VLANs. What must be configured on the Dell OS10 switches to allow multicast to cross VLAN boundaries?

A data center is deploying a new multicast application. The application uses a group address of 239.255.1.1. The network team wants to ensure that the multicast traffic does not leave the data center. What should be configured on the Dell OS10 switches?

Keep studying — Data Center Technologies