Identify VRRP Components POWERSWITCH-DATA-CENTER-DEPLOY Practice Questions (Page 2)

Questions 6–10

1. 6foundation · easy

   In VRRP, what does the term 'virtual router' refer to?

   • AA software router running on a virtual machine
   • BA router that is not physically present but is simulated for testing
   • CA physical router that is configured as the default gateway
   • DA logical entity that consists of a virtual IP and virtual MAC shared by a group of physical routers
   Reveal Solution Discussion Select an answer first
2. 7foundation · easy

   In VRRP configuration, what does the 'interface association' refer to?

   • ABinding the VRRP group to a specific Layer 3 interface on the router
   • BAssociating the VRRP group with a VLAN ID
   • CConnecting the VRRP group to a physical switch port
   • DLinking the VRRP group to a firewall policy
   Reveal Solution Discussion Select an answer first
4. 8application · medium

   A network engineer is configuring VRRP on a Dell PowerSwitch switch. The engineer wants to allow the switch to be the Master for multiple virtual routers on the same interface. The engineer creates VRRP group 10 with virtual IP 10.0.0.1 and VRRP group 20 with virtual IP 10.0.0.2. Which statement is true about this configuration?

   • AThe switch can only be Master for one group at a time.
   • BThe two groups must have the same priority.
   • CThe two groups must have different virtual MAC addresses.
   • DThe switch can be Master for both groups simultaneously.
   Reveal Solution Discussion Select an answer first
5. 9foundation · easy

   How is the master down timer typically calculated in VRRP?

   • AIt is fixed at 10 seconds regardless of configuration
   • BIt is three times the advertisement interval plus a small skew time
   • CIt is equal to the advertisement interval
   • DIt is twice the advertisement interval
   Reveal Solution Discussion Select an answer first
6. 10application · medium

   A network engineer is configuring VRRP on two Dell PowerSwitch switches. The engineer wants to ensure that if the Master fails, the Backup takes over quickly, but also that the original Master reclaims the role when it recovers. The engineer sets the advertisement interval to 1 second and the master down timer to 3 seconds. Which additional configuration is necessary to ensure the original Master reclaims the role?

   • ASet the priority of the Backup to 150.
   • BConfigure the virtual IP address on both switches' physical interfaces.
   • CSet the master down timer to 1 second.
   • DEnable preemption on both switches.
   Reveal Solution Discussion Select an answer first