Manage Host Access to Block Storage Resources POWERSTORE-OPERATE Practice Questions (Page 5)

Questions 21–25

1. 21application · medium

   A Fibre Channel host has been mapped to a PowerStore volume, but the host cannot see the volume. The administrator has verified that the host is defined correctly and the mapping is correct. What should the administrator check next?

   • AThe PowerStore system's time and NTP settings.
   • BThe host's IP address and subnet mask.
   • CThe volume's snapshot schedule.
   • DSAN zoning configuration to ensure the host's WWNs are zoned with the PowerStore front-end ports.
   Reveal Solution Discussion Select an answer first
2. 22foundation · easy

   When configuring an iSCSI initiator in PowerStore, which identifier is used?

   • AWWPN (World Wide Port Name)
   • BIQN (iSCSI Qualified Name)
   • CNQN (NVMe Qualified Name)
   • DMAC address
   Reveal Solution Discussion Select an answer first
4. 23application · medium

   An administrator is configuring a new iSCSI host to access a PowerStore volume. The host's initiator IQN is `iqn.2024-01.com.example:server1`. The administrator creates a host object and enters the IQN. Later, the host cannot see the mapped volume. What is the most likely cause?

   • AThe host was not added to a host group.
   • BThe IQN was entered with a typo, so the initiator does not match the host.
   • CThe volume was mapped with a LUN ID that is already in use by another volume.
   • DThe host's operating system is not supported by PowerStore.
   Reveal Solution Discussion Select an answer first
5. 24foundation · easy

   Which of the following is a valid initiator type that can be configured on a PowerStore host?

   • AFibre Channel (FC) WWN
   • BUSB device ID
   • CEthernet MAC address
   • DSAS address
   Reveal Solution Discussion Select an answer first
6. 25foundation · easy

   Which of the following is a common cause of host access issues in a Fibre Channel environment?

   • AIncorrect SAN zoning that prevents the host from reaching the storage ports
   • BThe host's CPU speed being too low
   • CThe volume being formatted with the wrong file system
   • DThe storage system's firmware being outdated
   Reveal Solution Discussion Select an answer first