An administrator is using PowerStore Manager to monitor the array. They want to see the real-time performance of a specific volume, including IOPS, latency, and bandwidth. Where should they navigate to view this information?

The 'Alerts' tab to see if there are any performance-related alerts

The 'Monitoring' tab, then 'Performance' and select the volume

The 'Settings' tab to configure performance thresholds

The 'Storage' tab, then 'Volumes' and select the volume

A PowerStore array is being monitored by an administrator. The array shows a high write latency, but the write cache hit ratio is also high (above 90%). What does this combination of metrics most likely indicate?

The write cache is too small for the workload

The latency metric is incorrect

The array is experiencing a hardware failure

The high latency is caused by the cache flush process, not by the cache itself

An administrator needs to monitor the performance of a PowerStore array over time to identify trends and plan for future capacity. Which tool provides the most comprehensive historical performance data for this purpose?

The PowerStore CLI (PSTCLI) with the '--output' flag

The PowerStore Manager real-time dashboard

A PowerStore array is experiencing intermittent performance degradation. The administrator has ruled out network issues and host-side problems. The array shows high write latency during peak hours, but the storage pool has plenty of free space and the CPU utilization is low. What is the most likely cause of the high write latency?

The write cache is filling up faster than it can be flushed to disk

The volume is configured with a low service level objective (SLO)

The storage pool is using a RAID 5 configuration that is inefficient for writes

The array is performing a background RAID rebuild

A PowerStore array hosts a mix of production and development volumes. The production volumes require high performance, while the development volumes are less critical. The administrator notices that the development volumes are consuming a disproportionate amount of the array's resources, causing latency spikes on the production volumes. What is the most effective way to address this issue?

Increase the number of volumes in the development pool

Move the development volumes to a different storage pool

Disable the write cache for the development volumes

Set a lower service level objective (SLO) for the development volumes

Dell PowerStore Operate

Domain 3Objective 9

Monitor PowerStore Block Storage Resources POWERSTORE-OPERATE Practice Questions (Page 1)

Part of the PowerStore Block Provisioning domain, which accounts for 17% of the POWERSTORE-OPERATE exam.

15questions here

3free pages

1concept

17%of the exam

Questions 1–5

1application · medium
An administrator is using PowerStore Manager to monitor the array. They want to see the real-time performance of a specific volume, including IOPS, latency, and bandwidth. Where should they navigate to view this information?
Select an answer first
2expert · hard
A PowerStore array is being monitored by an administrator. The array shows a high write latency, but the write cache hit ratio is also high (above 90%). What does this combination of metrics most likely indicate?
Select an answer first
3application · medium
An administrator needs to monitor the performance of a PowerStore array over time to identify trends and plan for future capacity. Which tool provides the most comprehensive historical performance data for this purpose?
Select an answer first
4expert · hard
A PowerStore array is experiencing intermittent performance degradation. The administrator has ruled out network issues and host-side problems. The array shows high write latency during peak hours, but the storage pool has plenty of free space and the CPU utilization is low. What is the most likely cause of the high write latency?
Select an answer first
5expert · hard
A PowerStore array hosts a mix of production and development volumes. The production volumes require high performance, while the development volumes are less critical. The administrator notices that the development volumes are consuming a disproportionate amount of the array's resources, causing latency spikes on the production volumes. What is the most effective way to address this issue?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to POWERSTORE-OPERATE

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWERSTORE-OPERATE” is a trademark of its owner, used for identification only.

Monitor PowerStore Block Storage Resources POWERSTORE-OPERATE Practice Questions (Page 1)

Questions 1–5

An administrator is using PowerStore Manager to monitor the array. They want to see the real-time performance of a specific volume, including IOPS, latency, and bandwidth. Where should they navigate to view this information?

A PowerStore array is being monitored by an administrator. The array shows a high write latency, but the write cache hit ratio is also high (above 90%). What does this combination of metrics most likely indicate?

An administrator needs to monitor the performance of a PowerStore array over time to identify trends and plan for future capacity. Which tool provides the most comprehensive historical performance data for this purpose?

Keep studying — PowerStore Block Provisioning