What is the first step in creating a PowerStore cluster during initial configuration?

Installing the PowerStore Discovery Tool on a management server

Setting up replication to a remote site

Configuring storage pools on all appliances

Adding the first appliance to form the cluster

After completing the initial configuration of a PowerStore system, what should you check to verify the system is ready for deployment?

The number of volumes already provisioned

The physical location of the appliance

The firmware version of the management laptop

System status, connectivity, and readiness

After creating a PowerStore cluster, an administrator wants to initialize a storage pool. The administrator selects the physical disks and clicks 'Create Pool'. The system reports that the pool creation failed because there is not enough capacity. What is the most likely reason?

The administrator selected only a subset of the available disks, leaving insufficient capacity.

The cluster does not have enough appliances to support a storage pool.

The physical disks are not compatible with the PowerStore system.

The storage pool must be created before the cluster is formed.

An administrator is creating a PowerStore cluster from two appliances. Both appliances are connected to the same network and have been discovered. The administrator adds the first appliance to the cluster, but when adding the second appliance, the cluster health validation fails. What should the administrator check first?

Ensure that the management IP addresses are on different subnets.

Confirm that the administrator password is the same on both appliances.

Check that the storage pools are initialized on both appliances.

Verify that both appliances are running the same PowerStore OS version.

When the PowerStore Discovery Tool is not used, which alternative method can be used to connect to a PowerStore appliance for initial configuration?

Booting the appliance from a USB drive containing configuration files

Manually configuring the management IP address on the appliance

Connecting via a serial console to the appliance's CLI

Using the appliance's default hostname to access it via HTTPS

Dell PowerStore Deploy

Domain 2Objective 2

Discover and Perform Initial System Configuration of PowerStore. POWERSTORE-DEPLOY Practice Questions (Page 2)

Part of the PowerStore Implementation domain, which accounts for 10% of the POWERSTORE-DEPLOY exam. Dell Technologies does not publish an official question count, but from its 90-minute exam (~35–60 total, ~4–6 in this domain), expect 1–2 from this objective — we provide 20 practice questions to prepare you well beyond it. (estimate)

20questions here

4free pages

6concepts

10%of the exam

Questions 6–10

6foundation · easy
What is the first step in creating a PowerStore cluster during initial configuration?
Select an answer first
7foundation · easy
After completing the initial configuration of a PowerStore system, what should you check to verify the system is ready for deployment?
Select an answer first
8application · medium
After creating a PowerStore cluster, an administrator wants to initialize a storage pool. The administrator selects the physical disks and clicks 'Create Pool'. The system reports that the pool creation failed because there is not enough capacity. What is the most likely reason?
Select an answer first
9application · medium
An administrator is creating a PowerStore cluster from two appliances. Both appliances are connected to the same network and have been discovered. The administrator adds the first appliance to the cluster, but when adding the second appliance, the cluster health validation fails. What should the administrator check first?
Select an answer first
10foundation · easy
When the PowerStore Discovery Tool is not used, which alternative method can be used to connect to a PowerStore appliance for initial configuration?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to POWERSTORE-DEPLOY

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWERSTORE-DEPLOY” is a trademark of its owner, used for identification only.