What is the purpose of creating a migration session in PowerStore Manager?

To schedule a backup of the source volumes

To create a snapshot of the destination volumes

To configure replication between two PowerStore appliances

To define the source and destination volumes for the data import

After completing a migration from a Dell EMC Unity to a PowerStore, a storage admin wants to confirm that the migrated volume is fully accessible to the host. The admin has already verified that the volume status on PowerStore is 'Ready'. What additional check should the admin perform?

Confirm that the migration session is still in progress.

Check that the source volume is still present on the Unity.

Verify that the host can read and write to the volume.

Ensure that the PowerStore volume is mapped to the host's WWNs.

Before starting a migration, what must be verified about the source and destination systems?

Both systems are running compatible software versions and have proper connectivity

Both systems are connected to the same management network

Both systems are from the same vendor

Both systems have the same amount of storage capacity

Which action is part of validating migrated data?

Confirm that hosts can read and write to the destination volumes

Reboot the PowerStore appliance

Delete the source volumes immediately

A company is migrating LUNs from a Dell EMC Unity to a PowerStore using Fibre Channel. The storage admin has zoned the fabric so that the Unity's storage processors can see the PowerStore's initiator ports. However, the migration session creation fails because the source and destination are not connected. What is the most likely missing configuration?

The Unity's management IP is not reachable from the PowerStore.

The PowerStore's target ports are not zoned to the Unity's storage processors.

The PowerStore appliance is not running the minimum supported version.

The Unity is not registered as a remote system.

Dell PowerStore Deploy

Domain 8Objective 3

Configure the Migration Feature to Import Data from Supported Sources. POWERSTORE-DEPLOY Practice Questions (Page 1)

Part of the PowerStore Migration domain, which accounts for 15% of the POWERSTORE-DEPLOY exam. Dell Technologies does not publish an official question count, but from its 90-minute exam (~35–60 total, ~5–9 in this domain), expect 2–3 from this objective — we provide 21 practice questions to prepare you well beyond it. (estimate)

21questions here

5free pages

7concepts

15%of the exam

Questions 1–5

1foundation · easy
What is the purpose of creating a migration session in PowerStore Manager?
Select an answer first
2application · medium
After completing a migration from a Dell EMC Unity to a PowerStore, a storage admin wants to confirm that the migrated volume is fully accessible to the host. The admin has already verified that the volume status on PowerStore is 'Ready'. What additional check should the admin perform?
Select an answer first
3foundation · easy
Before starting a migration, what must be verified about the source and destination systems?
Select an answer first
4foundation · easy
Which action is part of validating migrated data?
Select an answer first
5application · medium
A company is migrating LUNs from a Dell EMC Unity to a PowerStore using Fibre Channel. The storage admin has zoned the fabric so that the Unity's storage processors can see the PowerStore's initiator ports. However, the migration session creation fails because the source and destination are not connected. What is the most likely missing configuration?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to POWERSTORE-DEPLOY

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWERSTORE-DEPLOY” is a trademark of its owner, used for identification only.