Which IP addressing practice is recommended when planning the client network for a PowerScale cluster?

Assign a unique static IP address to each node's external interface

Use DHCP to assign IP addresses to node external interfaces automatically

Use a single large subnet for all client and backend traffic to simplify routing

Assign the same IP address to all nodes for load balancing

An administrator is troubleshooting a PowerScale cluster that cannot communicate with a storage array on a different subnet. The cluster's default gateway is correctly configured, and the storage array is reachable from other devices on the same network. What should the administrator check next?

Whether the IP pool has failover enabled.

Whether the NIS domain is configured correctly.

Whether the DNS server is reachable.

Whether a static route exists for the storage array's subnet.

Dell PowerScale Maintenance v2

Domain 1Objective 3

Set up PowerScale Networking POWERSCALE-MAINTENANCE Practice Questions (Page 3)

Part of the PowerScale Hardware Concepts domain, which accounts for 25% of the POWERSCALE-MAINTENANCE exam.

19questions here

4free pages

6concepts

25%of the exam

Questions 11–15

11application · medium
An administrator is setting up a PowerScale cluster with multiple client-facing subnets. They want to group the interfaces from different nodes into a single logical unit to simplify management and provide a common set of IP addresses for clients. What should they create?
Select an answer first
12foundation · easy
Which setting determines how client connections are distributed across the IP addresses in a PowerScale IP pool?
Select an answer first
13foundation · easy
Which tool would you use to test whether a client can reach a PowerScale cluster's IP address?
Select an answer first
14foundation · easy
Which IP addressing practice is recommended when planning the client network for a PowerScale cluster?
Select an answer first
15expert · hard
An administrator is troubleshooting a PowerScale cluster that cannot communicate with a storage array on a different subnet. The cluster's default gateway is correctly configured, and the storage array is reachable from other devices on the same network. What should the administrator check next?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to POWERSCALE-MAINTENANCE

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWERSCALE-MAINTENANCE” is a trademark of its owner, used for identification only.

Set up PowerScale Networking POWERSCALE-MAINTENANCE Practice Questions (Page 3)

Questions 11–15

An administrator is setting up a PowerScale cluster with multiple client-facing subnets. They want to group the interfaces from different nodes into a single logical unit to simplify management and provide a common set of IP addresses for clients. What should they create?

Which setting determines how client connections are distributed across the IP addresses in a PowerScale IP pool?

Which tool would you use to test whether a client can reach a PowerScale cluster's IP address?

Which IP addressing practice is recommended when planning the client network for a PowerScale cluster?

An administrator is troubleshooting a PowerScale cluster that cannot communicate with a storage array on a different subnet. The cluster's default gateway is correctly configured, and the storage array is reachable from other devices on the same network. What should the administrator check next?

Keep studying — PowerScale Hardware Concepts