Describe Requirements and Steps for Installing the Rack and Subcomponents POWERSCALE-MAINTENANCE Practice Questions (Page 5)

Questions 21–22

1. 21expert · medium

   A technician is installing a PowerScale rack and has just placed the rack in its final position. The technician notices that the rack is not level, with a slight tilt to the left. What should the technician do to correct this?

   • ALoosen the mounting screws on the left side of the rack to allow it to settle into a level position.
   • BAdjust the leveling feet on the rack until the rack is level in both directions.
   • CPlace a shim under the left side of the rack to raise it to level.
   • DLeave the rack as is, since a slight tilt does not affect the operation of the nodes.
   Reveal Solution Discussion Select an answer first
2. 22application · medium

   A technician is installing a PowerScale H700 node into a rack that already contains other equipment. The technician has unpacked the node and is ready to mount it. According to the standard rack installation procedure, what should the technician do first?

   • AConnect all data and power cables to the node before sliding it into the rack.
   • BInstall the rail kit onto the rack posts, ensuring the rails are level and securely fastened.
   • CSlide the node into the rack and then attach the cable management arm to the rear of the node.
   • DAttach the bezel to the front of the node to protect it during the mounting process.
   Reveal Solution Discussion Select an answer first