An admin is troubleshooting a performance issue that occurs sporadically. They suspect it's related to a specific job running on the cluster. They need to correlate the timing of the job with performance metrics. Which approach is most effective?

Use isi job to monitor job progress in real-time

Use isi performance to review historical data around the times the job ran

Use isi status to check for job-related alerts

Use isi statistics in real-time and watch for the job to run

A performance assessment requires comparing the performance of two different PowerScale clusters. The admin has access to both clusters' isi performance data. What is the primary limitation they should consider when making this comparison?

isi performance data is not stored long enough for comparison

isi performance only shows real-time data

isi performance does not support multiple clusters

The data may not be directly comparable due to different hardware configurations

Dell PowerScale Design v2

Domain 5Objective 1

Choose the Correct Tools to Assess Performance of the Customer Environment POWERSCALE-DESIGN-V2 Practice Questions (Page 1)

Part of the Monitor and Workflow Analysis tools domain, which accounts for 8% of the POWERSCALE-DESIGN-V2 exam.

13questions here

3free pages

3concepts

8%of the exam

Questions 1–5

1application · medium
An admin needs to generate a report showing the average IOPS and throughput for each node over the past month to present to management. Which tool should be used?
Select an answer first
2foundation · easy
Which web-based interface in PowerScale provides a graphical view of cluster performance metrics, including CPU, memory, and protocol activity?
Select an answer first
3expert · hard
An admin is troubleshooting a performance issue that occurs sporadically. They suspect it's related to a specific job running on the cluster. They need to correlate the timing of the job with performance metrics. Which approach is most effective?
Select an answer first
4application · medium
During a performance assessment, the admin notices that a single client is consuming an excessive amount of cluster resources. They need to confirm which client and which protocol is causing the load. Which command provides this information?
Select an answer first
5expert · hard
A performance assessment requires comparing the performance of two different PowerScale clusters. The admin has access to both clusters' isi performance data. What is the primary limitation they should consider when making this comparison?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to POWERSCALE-DESIGN-V2

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWERSCALE-DESIGN-V2” is a trademark of its owner, used for identification only.

Choose the Correct Tools to Assess Performance of the Customer Environment POWERSCALE-DESIGN-V2 Practice Questions (Page 1)

Questions 1–5

An admin needs to generate a report showing the average IOPS and throughput for each node over the past month to present to management. Which tool should be used?

Which web-based interface in PowerScale provides a graphical view of cluster performance metrics, including CPU, memory, and protocol activity?

An admin is troubleshooting a performance issue that occurs sporadically. They suspect it's related to a specific job running on the cluster. They need to correlate the timing of the job with performance metrics. Which approach is most effective?

During a performance assessment, the admin notices that a single client is consuming an excessive amount of cluster resources. They need to confirm which client and which protocol is causing the load. Which command provides this information?

A performance assessment requires comparing the performance of two different PowerScale clusters. The admin has access to both clusters' isi performance data. What is the primary limitation they should consider when making this comparison?

Keep studying — Monitor and Workflow Analysis tools