Describe Basic Internal and External Network Configurations, Multi- Tenancy, Groupnets, Subnets, Pools, and Rules POWERSCALE-DEPLOY Practice Questions (Page 3)

Questions 11–15

1. 11foundation · easy

   How many groupnets can a PowerScale cluster have by default?

   • ATwo
   • BOne
   • CMultiple, with one created by default
   • DThree
   Reveal Solution Discussion Select an answer first
2. 12application · medium

   A managed service provider (MSP) hosts a PowerScale cluster and wants to provide isolated storage access to two different tenant organizations. Each tenant must have its own IP address space and DNS zone, and the MSP wants to prevent any cross-tenant traffic. The MSP plans to create a separate groupnet for each tenant. Which additional configuration is REQUIRED to ensure that the tenants' network traffic remains fully isolated at the IP layer?

   • AConfigure a single groupnet with two subnets, and use access zones to separate the tenants' DNS and SMB shares.
   • BCreate a separate SmartConnect service IP pool in each tenant's groupnet, and ensure the pool's subnet is not shared with the other groupnet.
   • CAssign each tenant a unique set of static IP addresses from the same subnet, and use SmartConnect rules to route traffic to the correct tenant.
   • DCreate two SmartConnect service IP pools in the same subnet, and associate each pool with a different tenant's access zone.
   Reveal Solution Discussion Select an answer first
4. 13application · medium

   A large enterprise is consolidating two departments onto a single PowerScale cluster. The finance department requires strict network isolation from the engineering department. The administrator plans to use groupnets to achieve this. Which statement accurately describes how groupnets should be configured to meet this requirement?

   • ACreate a single groupnet with two pools, and use SmartConnect rules to route each department's traffic to the appropriate pool.
   • BCreate two groupnets, one for each department, and ensure that each groupnet has its own subnets and IP pools.
   • CCreate a single groupnet with two subnets, one for each department, and configure access zones to restrict access.
   • DCreate two groupnets, but share a single subnet between them to conserve IP addresses.
   Reveal Solution Discussion Select an answer first
5. 14foundation · easy

   Which component in PowerScale provides client access to the cluster by presenting a set of IP addresses that can be load-balanced across nodes?

   • AIP pool
   • BSmartConnect zone
   • CGroupnet
   • DSubnet
   Reveal Solution Discussion Select an answer first
6. 15foundation · easy

   Which PowerScale object is used to create a separate network domain for a tenant?

   • AIP pool
   • BAccess zone
   • CSmartConnect zone
   • DGroupnet
   Reveal Solution Discussion Select an answer first