A PowerScale cluster is being deployed with four nodes. The administrator notices that the default internal subnet is configured with a specific IP range. The cluster will be used for a high-performance computing workload where nodes need to communicate with each other for data replication and distributed processing. What is the PRIMARY purpose of the internal subnet in this cluster?

To provide client-facing IP addresses that are used for NFS and SMB access to the cluster.

To allow external clients to access the cluster via SmartConnect DNS names.

To provide a separate network for management access via SSH and the web administration interface.

To enable node-to-node communication for cluster operations such as data replication, heartbeat, and distributed processing.

In PowerScale, what does a subnet define within a groupnet?

The authentication methods for client access

A set of nodes that will host client IPs

A DNS zone and SmartConnect settings

What is the role of a groupnet in PowerScale's network configuration?

To organize subnets and pools into a single network domain

To provide load balancing for client connections

To manage the physical network interfaces on each node

To define the IP address ranges for client access

What is the primary purpose of multi-tenancy in a PowerScale cluster?

To increase the total storage capacity of the cluster

To enable multiple protocols on the same IP address

To provide a single namespace for all clients

To isolate network traffic between different tenants or departments

Dell PowerScale Deploy

Domain 2Objective 2

Describe Basic Internal and External Network Configurations, Multi- Tenancy, Groupnets, Subnets, Pools, and Rules POWERSCALE-DEPLOY Practice Questions (Page 2)

Part of the Configuring the Foundations for Access domain, which accounts for 17% of the POWERSCALE-DEPLOY exam.

15questions here

3free pages

7concepts

17%of the exam

Questions 6–10

6foundation · easy
Which internal network component in a PowerScale cluster is responsible for carrying node-to-node communication, including data replication and distributed filesystem operations?
Select an answer first
7application · medium
A PowerScale cluster is being deployed with four nodes. The administrator notices that the default internal subnet is configured with a specific IP range. The cluster will be used for a high-performance computing workload where nodes need to communicate with each other for data replication and distributed processing. What is the PRIMARY purpose of the internal subnet in this cluster?
Select an answer first
8foundation · easy
In PowerScale, what does a subnet define within a groupnet?
Select an answer first
9foundation · easy
What is the role of a groupnet in PowerScale's network configuration?
Select an answer first
10foundation · easy
What is the primary purpose of multi-tenancy in a PowerScale cluster?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to POWERSCALE-DEPLOY

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWERSCALE-DEPLOY” is a trademark of its owner, used for identification only.

Describe Basic Internal and External Network Configurations, Multi- Tenancy, Groupnets, Subnets, Pools, and Rules POWERSCALE-DEPLOY Practice Questions (Page 2)

Questions 6–10

Which internal network component in a PowerScale cluster is responsible for carrying node-to-node communication, including data replication and distributed filesystem operations?

In PowerScale, what does a subnet define within a groupnet?

What is the role of a groupnet in PowerScale's network configuration?

What is the primary purpose of multi-tenancy in a PowerScale cluster?

Keep studying — Configuring the Foundations for Access