A storage team is planning to add additional I/O modules to a PowerMax 2500 to support new host connectivity. They need to identify the correct location for these modules. Where should they install the new I/O modules?

In the rear of the chassis, in the I/O slots

In the side of the chassis, in the expansion bay

In the front of the chassis, in the drive bays

In the top of the chassis, in the service bay

A technician is performing a health check on a PowerMax 8000 and notices an amber LED on a cooling module. The system is running at normal temperature, but the module is reporting a fault. What should the technician do?

Replace the cooling module immediately, as it is faulty.

Ignore the LED because the temperature is normal.

Check the system logs to confirm the fault before replacing the module.

Reboot the system to clear the LED.

Dell PowerMax Maintenance

Domain 2Objective 3

Locate PowerMax 2000 and 8000, and PowerMax 2500 and 8500 Hardware Components POWERMAX-MAINTENANCE Practice Questions (Page 2)

Part of the PowerMaxOS 10 Hardware Concepts domain, which accounts for 20% of the POWERMAX-MAINTENANCE exam.

16questions here

4free pages

3concepts

20%of the exam

Questions 6–10

6application · medium
A technician is documenting the front view of a PowerMax 2000. Which component is prominently visible in the front view?
Select an answer first
7application · medium
A storage team is planning to add additional I/O modules to a PowerMax 2500 to support new host connectivity. They need to identify the correct location for these modules. Where should they install the new I/O modules?
Select an answer first
8foundation · easy
Which hardware component is visible on the front of a PowerMax 8500 system?
Select an answer first
9application · medium
A technician is performing a health check on a PowerMax 8000 and notices an amber LED on a cooling module. The system is running at normal temperature, but the module is reporting a fault. What should the technician do?
Select an answer first
10application · medium
A data center technician is documenting the physical layout of a PowerMax 8500. The technician needs to identify where the storage bays are located to plan for future drive additions. Where should the technician look?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to POWERMAX-MAINTENANCE

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWERMAX-MAINTENANCE” is a trademark of its owner, used for identification only.

Locate PowerMax 2000 and 8000, and PowerMax 2500 and 8500 Hardware Components POWERMAX-MAINTENANCE Practice Questions (Page 2)

Questions 6–10

A technician is documenting the front view of a PowerMax 2000. Which component is prominently visible in the front view?

A storage team is planning to add additional I/O modules to a PowerMax 2500 to support new host connectivity. They need to identify the correct location for these modules. Where should they install the new I/O modules?

Which hardware component is visible on the front of a PowerMax 8500 system?

A technician is performing a health check on a PowerMax 8000 and notices an amber LED on a cooling module. The system is running at normal temperature, but the module is reporting a fault. What should the technician do?

A data center technician is documenting the physical layout of a PowerMax 8500. The technician needs to identify where the storage bays are located to plan for future drive additions. Where should the technician look?

Keep studying — PowerMaxOS 10 Hardware Concepts