Explain PowerMax 2000 and 8000, and PowerMax 2500 and 8500 Bay Configurations, System Connectivity, and Local/Flexible RAID POWERMAX-MAINTENANCE Practice Questions (Page 1)

Questions 1–5

1. 1foundation · easy

   What is the primary purpose of front-end connectivity in a PowerMax system?

   • ATo connect the base bay to expansion bays
   • BTo connect the storage processors to the drive array enclosures
   • CTo connect the system to a management network for remote administration
   • DTo connect hosts to the storage system via protocols like Fibre Channel or iSCSI
   Reveal Solution Discussion Select an answer first
2. 2application · medium

   A company is planning to deploy a PowerMax 8000 system. The system will be configured with multiple expansion bays to house additional drives. Which component is responsible for providing the physical connection between the base bay and the expansion bays?

   • AThe back-end I/O modules
   • BThe front-end I/O modules
   • CThe midplane
   • DThe storage processors
   Reveal Solution Discussion Select an answer first
4. 3application · medium

   A data center is deploying a new PowerMax 2000 system. The facility manager has marked a specific floor location for the system and wants to know which bay will house the storage processors and front-end I/O modules. Based on the standard PowerMax 2000 bay layout, which bay should the team expect to contain these components?

   • AThe service bay
   • BThe drive bay
   • CThe base bay
   • DThe expansion bay
   Reveal Solution Discussion Select an answer first
5. 4foundation · easy

   Which statement correctly describes the bay layout of a PowerMax 8000 system?

   • AIt has no bays; all components are rack-mounted independently.
   • BIt uses a base bay plus one or more expansion bays for additional drive capacity.
   • CIt uses a single bay that contains only drives.
   • DIt consists of a single bay that contains all components.
   Reveal Solution Discussion Select an answer first
6. 5application · medium

   A PowerMax system is configured with a RAID 5 (3+1) local RAID group. The system experiences a single drive failure. What is the immediate impact on data availability?

   • AData is unavailable until the failed drive is replaced and rebuilt.
   • BData remains fully available because parity can be used to reconstruct the failed drive's data.
   • CData becomes read-only until the failed drive is replaced.
   • DData is lost because RAID 5 cannot tolerate any drive failures.
   Reveal Solution Discussion Select an answer first