After running an iDRAC diagnostic test, what should you do if the test result is 'Pass' but the issue persists?

Run the test again with different parameters

Investigate other potential causes, such as software or configuration

In the iDRAC System Event Log (SEL), what does an event with a severity level of 'Warning' typically indicate?

An informational event with no action needed

A non-critical condition that may require attention

A critical failure that requires immediate action

On the iDRAC Hardware Inventory page, what does a component's health status of 'Critical' indicate?

The component is in a low-power state

The component is functioning normally

The component has failed or is at risk of failure

A server is experiencing intermittent crashes. The SEL shows a 'CPU Machine Check Error' event, but the CPU diagnostic test passes. What should the administrator do next?

Update the BIOS firmware to fix a potential bug.

Check the SEL for other events that may correlate with the machine check error.

Replace the CPU because the SEL indicates a fault.

Run the memory diagnostic test to rule out memory issues.

Dell PowerEdge XE Operate

Domain 5Objective 5

Use iDRAC Diagnostic Tools to Pinpoint Issues POWEREDGE-XE-OPERATE Practice Questions (Page 3)

Part of the Troubleshooting domain, which accounts for 26% of the POWEREDGE-XE-OPERATE exam.

32questions here

7free pages

9concepts

26%of the exam

Questions 11–15

11foundation · easy
After running an iDRAC diagnostic test, what should you do if the test result is 'Pass' but the issue persists?
Select an answer first
12foundation · easy
In the iDRAC System Event Log (SEL), what does an event with a severity level of 'Warning' typically indicate?
Select an answer first
13foundation · easy
On the iDRAC Hardware Inventory page, what does a component's health status of 'Critical' indicate?
Select an answer first
14expert · medium
A server is experiencing intermittent crashes. The SEL shows a 'CPU Machine Check Error' event, but the CPU diagnostic test passes. What should the administrator do next?
Select an answer first
15foundation · easy
If a server is experiencing power-related issues, which iDRAC sensor readings should you examine?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to POWEREDGE-XE-OPERATE

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWEREDGE-XE-OPERATE” is a trademark of its owner, used for identification only.