A server is experiencing performance issues. The SEL shows a warning event: 'Voltage Sensor: System Board 3.3V, Lower Critical going low' but the current sensor reading is 3.3V. What should the administrator do?

Ignore the event because the current reading is normal.

Check the SEL for related events and monitor the voltage sensor over time.

Run a full diagnostic test to check the voltage regulator.

After running the iDRAC diagnostic test for storage, the results show 'Test Failed' for Physical Disk 1 in Slot 2. The SEL also shows a 'Predictive Failure' event for the same disk. What is the most appropriate next step?

Run the diagnostic test again to confirm the result.

Clear the SEL and continue monitoring.

Replace the physical disk immediately.

Rebuild the RAID array using the disk.

What is the primary purpose of the iDRAC Virtual Console feature in a remote diagnostic scenario?

To provide remote graphical or serial console access to the server

To mount an ISO image to the server

To run built-in diagnostic tests

If an iDRAC diagnostic test reports a 'Fail' for a memory module, what is the most appropriate next step?

Replace the failing memory module

Ignore the result and continue using the server

Dell PowerEdge XE Operate

Domain 5Objective 5

Use iDRAC Diagnostic Tools to Pinpoint Issues POWEREDGE-XE-OPERATE Practice Questions (Page 2)

Part of the Troubleshooting domain, which accounts for 26% of the POWEREDGE-XE-OPERATE exam.

32questions here

7free pages

9concepts

26%of the exam

Questions 6–10

6application · medium
A server is experiencing performance issues. The SEL shows a warning event: 'Voltage Sensor: System Board 3.3V, Lower Critical going low' but the current sensor reading is 3.3V. What should the administrator do?
Select an answer first
7application · medium
After running the iDRAC diagnostic test for storage, the results show 'Test Failed' for Physical Disk 1 in Slot 2. The SEL also shows a 'Predictive Failure' event for the same disk. What is the most appropriate next step?
Select an answer first
8foundation · easy
What is the primary purpose of the iDRAC Virtual Console feature in a remote diagnostic scenario?
Select an answer first
9application · easy
A server is experiencing random reboots. The SEL shows no critical events, but the administrator suspects a CPU issue. Which iDRAC diagnostic test should the administrator run to test the CPU?
Select an answer first
10foundation · easy
If an iDRAC diagnostic test reports a 'Fail' for a memory module, what is the most appropriate next step?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to POWEREDGE-XE-OPERATE

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWEREDGE-XE-OPERATE” is a trademark of its owner, used for identification only.