A Dell PowerEdge XE server is being configured with a partner NIC that supports RDMA. The admin has the server's current firmware versions and the NIC's firmware requirements. What should the admin do to ensure the NIC works correctly?

Use the NIC vendor's driver installation CD to update the server firmware

Check the Dell firmware compatibility matrix for the supported NIC and server firmware versions

Update the server BIOS to the latest version to support RDMA

Install the NIC and configure RDMA in the OS

After updating the firmware on a Dell PowerEdge XE server and its partner NIC, the admin wants to confirm the update was successful and the NIC is functioning correctly. What should the admin do?

Reboot the server and check if the NIC is detected in the BIOS

Check the Dell support website for the latest NIC firmware version

Run a network speed test to confirm the NIC is working

Check the iDRAC lifecycle log for the update status and verify the NIC firmware version in the operating system

After updating the firmware on a Dell PowerEdge XE server and its partner NIC, the admin notices that the NIC is not performing at expected speeds. The firmware update was reported as successful. What should the admin do to troubleshoot?

Update the NIC driver to the latest version

Check the network cable and switch ports

Verify the NIC firmware version in the OS and check the iDRAC lifecycle log for any warnings

A Dell PowerEdge XE server has a partner storage controller. What should an administrator do to maintain compatibility when updating the server firmware?

Disable the storage controller before updating the server firmware

Check the compatibility matrix for the storage controller firmware version

Update the server firmware using a different method than the storage controller

Update the storage controller firmware to the latest version available

Dell PowerEdge XE Operate

Domain 3Objective 5

Update Firmware to Ensure Compatibility with Partner Technologies POWEREDGE-XE-OPERATE Practice Questions (Page 5)

Part of the Firmware Management domain, which accounts for 14% of the POWEREDGE-XE-OPERATE exam.

24questions here

5free pages

5concepts

14%of the exam

Questions 21–24

21application · medium
A Dell PowerEdge XE server is being configured with a partner NIC that supports RDMA. The admin has the server's current firmware versions and the NIC's firmware requirements. What should the admin do to ensure the NIC works correctly?
Select an answer first
22application · medium
After updating the firmware on a Dell PowerEdge XE server and its partner NIC, the admin wants to confirm the update was successful and the NIC is functioning correctly. What should the admin do?
Select an answer first
23expert · hard
After updating the firmware on a Dell PowerEdge XE server and its partner NIC, the admin notices that the NIC is not performing at expected speeds. The firmware update was reported as successful. What should the admin do to troubleshoot?
Select an answer first
24foundation · easy
A Dell PowerEdge XE server has a partner storage controller. What should an administrator do to maintain compatibility when updating the server firmware?
Select an answer first

Finished these 4 questions?

Review the revealed explanations, or continue through the curriculum.

No more pagesBack to POWEREDGE-XE-OPERATE

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWEREDGE-XE-OPERATE” is a trademark of its owner, used for identification only.