Which visual indicator would you interpret to assess the health of a server's hard drive?

The power button LED on the front panel

The network link LED on the NIC

The drive activity LED on the drive carrier

The system identification LED on the back panel

A technician is performing a visual inspection of a PowerEdge server in a remote site with no network connectivity. The server's front panel shows a solid amber system LED, and the NIC LEDs are off. The server is powered on but not responding to pings. What is the most likely cause?

The server is in standby mode and will respond once the network is restored.

The power supply has failed and the server is running on backup power.

The server is healthy but the network cable is unplugged.

The server has a fault condition, and the NIC may be faulty or not connected.

A company has a policy that all server rooms must be physically inspected weekly. During a weekly inspection, a technician notices that a PowerEdge server's front panel has a blinking blue LED. What does this indicate?

The server is in a fault state and requires immediate attention.

The server is being remotely identified, possibly by iDRAC's 'Identify' feature.

The server's power supply has failed and the system is on battery backup.

The server is in normal operation and the LED is just a status indicator.

Which information is most important to record when documenting a visual inspection finding?

The exact location and description of the observed issue

The name of the technician's supervisor

A technician is performing a visual inspection of a PowerEdge server and notices that the front bezel is missing. The server is in a high-security area. What should the technician do?

Leave the bezel off because it is not required for server operation.

Ignore the missing bezel because it does not affect server health.

Document the missing bezel and order a replacement to ensure physical security and proper airflow.

Replace the server because the missing bezel indicates a security breach.

Dell PowerEdge XE Operate

Domain 4Objective 5

Perform Visual Inspections in Cases Where Automated Monitoring Is Unavailable POWEREDGE-XE-OPERATE Practice Questions (Page 3)

Part of the System Monitoring domain, which accounts for 26% of the POWEREDGE-XE-OPERATE exam.

20questions here

4free pages

4concepts

26%of the exam

Questions 11–15

11foundation · medium
Which visual indicator would you interpret to assess the health of a server's hard drive?
Select an answer first
12expert · hard
A technician is performing a visual inspection of a PowerEdge server in a remote site with no network connectivity. The server's front panel shows a solid amber system LED, and the NIC LEDs are off. The server is powered on but not responding to pings. What is the most likely cause?
Select an answer first
13application · medium
A company has a policy that all server rooms must be physically inspected weekly. During a weekly inspection, a technician notices that a PowerEdge server's front panel has a blinking blue LED. What does this indicate?
Select an answer first
14foundation · medium
Which information is most important to record when documenting a visual inspection finding?
Select an answer first
15expert · hard
A technician is performing a visual inspection of a PowerEdge server and notices that the front bezel is missing. The server is in a high-security area. What should the technician do?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to POWEREDGE-XE-OPERATE

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWEREDGE-XE-OPERATE” is a trademark of its owner, used for identification only.