Ensure Compatibility with Third-Party Tools and Partner Technologies POWEREDGE-XE-OPERATE Practice Questions (Page 4)

Questions 16–20

1. 16foundation · medium

   What is the PRIMARY purpose of using Dell's validated partner technology integrations for PowerEdge XE systems?

   • ATo guarantee the partner technology is the lowest-cost option
   • BTo replace the server's native management tools
   • CTo ensure the partner technology operates reliably with the server's hardware and firmware
   • DTo reduce the need for firmware updates
   Reveal Solution Discussion Select an answer first
2. 17application · medium

   A customer is planning to use a third-party log management tool that collects system logs from Dell PowerEdge XE servers. The tool supports syslog. What is the primary compatibility requirement for this integration?

   • AThe iDRAC must be configured to send syslog to the tool's server
   • BThe tool must support the Dell proprietary log format
   • CThe tool must be installed on the same server
   • DThe server's OS must be the same as the tool's OS
   Reveal Solution Discussion Select an answer first
4. 18expert · hard

   A partner's storage array is connected to a Dell PowerEdge XE server via Fibre Channel. The array works, but performance is below expectations. The partner's documentation states that the server's HBA must be in a specific mode. The HBA is currently in the default mode. What should the administrator do?

   • ACheck the Dell compatibility matrix for the HBA model
   • BIncrease the number of Fibre Channel ports on the server
   • CUpdate the storage array's firmware to the latest version
   • DChange the HBA mode to the one specified by the partner and re-test performance
   Reveal Solution Discussion Select an answer first
5. 19expert · hard

   A company is validating a third-party hardware inventory tool for Dell PowerEdge XE servers. The tool queries iDRAC via Redfish. During validation, the tool returns incomplete data for some servers. The administrator notices that the affected servers have an older iDRAC firmware. What is the best course of action?

   • AReboot the affected servers to refresh the iDRAC
   • BUse a different tool that supports the older firmware
   • CQuery the servers using SNMP instead of Redfish
   • DUpdate the iDRAC firmware on the affected servers to a version that supports the Redfish queries
   Reveal Solution Discussion Select an answer first
6. 20application · medium

   A partner's power management tool is integrated with Dell PowerEdge XE servers via iDRAC. The tool reports that it cannot read power consumption data. The iDRAC web interface shows power readings correctly. What should the administrator check?

   • AThe OS's power management settings
   • BThe tool's API credentials and permissions on the iDRAC
   • CThe server's power supply status
   • DThe network cable connecting the server to the switch
   Reveal Solution Discussion Select an answer first