A Dell PowerEdge XE server is being validated for use with a third-party monitoring tool. The tool uses SNMP to collect hardware metrics. After configuring the tool, the administrator finds that temperature readings are missing. What should the administrator check first?

Verify that the SNMP community string and OIDs match the Dell iDRAC MIB

Check if the monitoring tool is listed on the Dell compatibility matrix

Reboot the server to reset the SNMP service

Update the iDRAC firmware to the latest version

A partner's monitoring plugin for Dell PowerEdge XE servers is not displaying fan speed readings. The plugin uses the iDRAC SNMP interface. The administrator confirms that SNMP is enabled and the community string is correct. What should the administrator check next?

Verify that the plugin uses the correct OIDs from the Dell MIB

Check the server's fan status in the OS

When integrating a third-party management tool with a Dell PowerEdge XE server, which resource should an administrator consult FIRST to confirm that the tool is officially supported?

The Dell PowerEdge XE Owner's Manual

The operating system vendor's hardware compatibility list

The third-party tool's online user forum

The Dell Enterprise Support website's compatibility matrix

A third-party monitoring tool fails to detect sensors on a Dell PowerEdge XE server. What is the MOST likely cause to investigate first?

The tool does not support the server's iDRAC or management interface version

The server is not connected to a UPS

The server's power supply is not redundant

Incorrect time zone settings on the server

A partner's management plugin for Dell PowerEdge XE servers fails to discover the server over the network. The plugin uses WS-Man. The server's iDRAC is reachable via ping, and the web interface works. What is the most likely cause of the discovery failure?

The iDRAC IP address is not in the same subnet as the plugin

The server's OS firewall is blocking the plugin

WS-Man is disabled on the iDRAC

The plugin requires a newer version of Java

Dell PowerEdge XE Operate

Domain 1Objective 4

Ensure Compatibility with Third-Party Tools and Partner Technologies POWEREDGE-XE-OPERATE Practice Questions (Page 2)

Part of the Scaling Solutions domain, which accounts for 19% of the POWEREDGE-XE-OPERATE exam.

21questions here

5free pages

4concepts

19%of the exam

Questions 6–10

6application · medium
A Dell PowerEdge XE server is being validated for use with a third-party monitoring tool. The tool uses SNMP to collect hardware metrics. After configuring the tool, the administrator finds that temperature readings are missing. What should the administrator check first?
Select an answer first
7application · medium
A partner's monitoring plugin for Dell PowerEdge XE servers is not displaying fan speed readings. The plugin uses the iDRAC SNMP interface. The administrator confirms that SNMP is enabled and the community string is correct. What should the administrator check next?
Select an answer first
8foundation · medium
When integrating a third-party management tool with a Dell PowerEdge XE server, which resource should an administrator consult FIRST to confirm that the tool is officially supported?
Select an answer first
9foundation · medium
A third-party monitoring tool fails to detect sensors on a Dell PowerEdge XE server. What is the MOST likely cause to investigate first?
Select an answer first
10expert · hard
A partner's management plugin for Dell PowerEdge XE servers fails to discover the server over the network. The plugin uses WS-Man. The server's iDRAC is reachable via ping, and the web interface works. What is the most likely cause of the discovery failure?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to POWEREDGE-XE-OPERATE

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWEREDGE-XE-OPERATE” is a trademark of its owner, used for identification only.