A PowerEdge XE server logs 'PCIe fatal error on slot 3' in the system event log. The server is still running but the PCIe device in slot 3 is not responding. What is the most appropriate corrective action?

Reseat the PCIe card in slot 3 and check for proper seating.

Update the PCIe device firmware.

Replace the PCIe card immediately.

A PowerEdge XE server fails to POST with a solid amber LED on the system board. The front panel LCD shows no error code. You need to identify the faulty component. Which tool should you use first?

Dell SupportAssist Enterprise to run a full system scan.

The integrated Dell Remote Access Controller (iDRAC) system event log and LCD diagnostics.

A multimeter to test the power supply output voltages.

Dell OpenManage Server Administrator (OMSA) to view the hardware inventory.

A Dell PowerEdge XE server's front panel shows a solid amber status LED. What does this typically indicate?

The server is in standby power mode with no faults.

The server is experiencing a non-critical or critical fault condition.

The server is performing a firmware update.

The server is in a healthy, powered-on state.

A PowerEdge XE server logs 'CPU 2 thermal trip' and shuts down unexpectedly. The server has two CPUs and the cooling fans are running at full speed. The system event log shows 'Fan 4 failure' and 'CPU 2 temperature critical'. You have a replacement fan. What is the most appropriate corrective action?

Power on the server and monitor the temperature.

Replace fan 4 immediately and then power on the server.

A PowerEdge XE server is failing to boot. The system event log shows 'RAID controller cache is corrupted'. The server has a RAID controller with a battery backup unit (BBU). You have a replacement BBU. What is the most appropriate corrective action?

Clear the RAID controller cache without replacing the BBU.

Replace the BBU and then clear the RAID controller cache.

Update the RAID controller firmware.

Dell PowerEdge XE Operate

Domain 5Objective 7

Address Hardware Failures POWEREDGE-XE-OPERATE Practice Questions (Page 4)

Part of the Troubleshooting domain, which accounts for 26% of the POWEREDGE-XE-OPERATE exam.

23questions here

5free pages

5concepts

26%of the exam

Questions 16–20

16application · medium
A PowerEdge XE server logs 'PCIe fatal error on slot 3' in the system event log. The server is still running but the PCIe device in slot 3 is not responding. What is the most appropriate corrective action?
Select an answer first
17application · medium
A PowerEdge XE server fails to POST with a solid amber LED on the system board. The front panel LCD shows no error code. You need to identify the faulty component. Which tool should you use first?
Select an answer first
18foundation · easy
A Dell PowerEdge XE server's front panel shows a solid amber status LED. What does this typically indicate?
Select an answer first
19expert · hard
A PowerEdge XE server logs 'CPU 2 thermal trip' and shuts down unexpectedly. The server has two CPUs and the cooling fans are running at full speed. The system event log shows 'Fan 4 failure' and 'CPU 2 temperature critical'. You have a replacement fan. What is the most appropriate corrective action?
Select an answer first
20expert · hard
A PowerEdge XE server is failing to boot. The system event log shows 'RAID controller cache is corrupted'. The server has a RAID controller with a battery backup unit (BBU). You have a replacement BBU. What is the most appropriate corrective action?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to POWEREDGE-XE-OPERATE

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWEREDGE-XE-OPERATE” is a trademark of its owner, used for identification only.