A PowerEdge XE server fails to boot and displays a 'No Boot Device Found' error. The RAID controller shows the virtual disk as 'Degraded'. What is the most likely cause and the first step to resolve it?

The RAID controller battery is dead; replace the battery.

A physical disk has failed; check the RAID controller status and replace the failed disk.

The boot order is incorrect; change the boot order in BIOS.

The operating system is corrupted; reinstall the OS.

A PowerEdge XE server has a failed disk in a RAID 5 array. The server is still running, but performance is degraded. The system event log shows 'Predictive failure on disk 0:1:2'. You have a hot-spare disk configured. What is the most appropriate corrective action?

Wait for the hot-spare to rebuild without replacing the failed disk.

Replace the failed disk and allow the hot-spare to rebuild.

A PowerEdge XE server is overheating. The system event log shows a fan failure on fan 2. The server has redundant fans. What is the first step in your troubleshooting procedure?

Shut down the server to prevent thermal damage.

Check the fan status in iDRAC and reseat the fan if necessary.

Replace fan 2 immediately with a spare.

Update the fan firmware to the latest version.

A Dell PowerEdge XE server reports a memory error for DIMM_A2. What is the first step in the systematic troubleshooting procedure for this issue?

Reseat DIMM_A2 and run a memory diagnostic test.

Replace DIMM_A2 immediately with a known-good module.

Update the system BIOS to the latest version.

Check the system event log for other errors.

A Dell PowerEdge XE server is experiencing intermittent storage controller errors. The diagnostic tests indicate a firmware issue. What is the most appropriate corrective action?

Reseat the storage controller in its slot.

Update the storage controller firmware to the latest version.

Replace the storage controller.

Disable the storage controller cache.

Dell PowerEdge XE Operate

Domain 5Objective 7

Address Hardware Failures POWEREDGE-XE-OPERATE Practice Questions (Page 3)

Part of the Troubleshooting domain, which accounts for 26% of the POWEREDGE-XE-OPERATE exam.

23questions here

5free pages

5concepts

26%of the exam

Questions 11–15

11application · medium
A PowerEdge XE server fails to boot and displays a 'No Boot Device Found' error. The RAID controller shows the virtual disk as 'Degraded'. What is the most likely cause and the first step to resolve it?
Select an answer first
12expert · hard
A PowerEdge XE server has a failed disk in a RAID 5 array. The server is still running, but performance is degraded. The system event log shows 'Predictive failure on disk 0:1:2'. You have a hot-spare disk configured. What is the most appropriate corrective action?
Select an answer first
13application · medium
A PowerEdge XE server is overheating. The system event log shows a fan failure on fan 2. The server has redundant fans. What is the first step in your troubleshooting procedure?
Select an answer first
14foundation · easy
A Dell PowerEdge XE server reports a memory error for DIMM_A2. What is the first step in the systematic troubleshooting procedure for this issue?
Select an answer first
15foundation · easy
A Dell PowerEdge XE server is experiencing intermittent storage controller errors. The diagnostic tests indicate a firmware issue. What is the most appropriate corrective action?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to POWEREDGE-XE-OPERATE

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWEREDGE-XE-OPERATE” is a trademark of its owner, used for identification only.