A PowerEdge R740 has a RAID 5 array of 6 drives. During a health check, OMSA reports that Drive 4 has a 'SMART Alert' and its status is 'Predictive Failure'. The array is in a 'Ready' state. The admin also notices that the system health LED is blinking amber. What is the most appropriate action?

Check the SMART data, but do nothing because the array is still ready.

Replace all drives in the array to ensure consistency.

Replace Drive 4 immediately, as the SMART alert indicates imminent failure.

Wait until the drive actually fails, then replace it.

A data center admin is performing a health check on a PowerEdge R940. They want to verify that the CPU is functioning correctly. Which of the following is the most reliable indicator of a CPU hardware fault?

The CPU temperature sensor is reading 45°C.

The CPU fan RPM is within the normal range.

The CPU utilization is at 100%.

The system event log (SEL) contains 'CPU' errors, such as 'Machine Check Error' or 'CPU Thermal Trip'.

Which Dell OpenManage tool is an in-band agent that runs on the server's operating system to provide hardware health information?

OpenManage Server Administrator

A PowerEdge R650 is experiencing intermittent performance issues. The admin checks iDRAC and sees no critical alerts. However, the SEL shows repeated 'Correctable ECC error' events on DIMM B2. The error counter is not incrementing rapidly. What is the most likely cause of the performance issues?

The storage array is failing and causing slow I/O.

The DIMM B2 is failing and causing memory errors, which can lead to performance degradation.

The CPU is overheating and throttling.

What does a memory ECC error indicate during a health check?

The memory module is operating at a higher speed than specified

The memory module is overheating

The memory module is not seated properly

A correctable or uncorrectable memory error has been detected

Dell PowerEdge Operate

Domain 4Objective 1

Perform Health Checks of Hardware Components POWEREDGE-OPERATE-V2 Practice Questions (Page 2)

Part of the Server Monitoring domain, which accounts for 20% of the POWEREDGE-OPERATE-V2 exam.

26questions here

6free pages

5concepts

20%of the exam

Questions 6–10

6expert · hard
A PowerEdge R740 has a RAID 5 array of 6 drives. During a health check, OMSA reports that Drive 4 has a 'SMART Alert' and its status is 'Predictive Failure'. The array is in a 'Ready' state. The admin also notices that the system health LED is blinking amber. What is the most appropriate action?
Select an answer first
7application · medium
A data center admin is performing a health check on a PowerEdge R940. They want to verify that the CPU is functioning correctly. Which of the following is the most reliable indicator of a CPU hardware fault?
Select an answer first
8foundation · easy
Which Dell OpenManage tool is an in-band agent that runs on the server's operating system to provide hardware health information?
Select an answer first
9expert · hard
A PowerEdge R650 is experiencing intermittent performance issues. The admin checks iDRAC and sees no critical alerts. However, the SEL shows repeated 'Correctable ECC error' events on DIMM B2. The error counter is not incrementing rapidly. What is the most likely cause of the performance issues?
Select an answer first
10foundation · easy
What does a memory ECC error indicate during a health check?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to POWEREDGE-OPERATE-V2

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWEREDGE-OPERATE-V2” is a trademark of its owner, used for identification only.