Which operation is performed to create a new virtual disk on a PowerEdge server with a PERC controller?

Select RAID level and physical disks

A server administrator is troubleshooting a performance issue on a PowerEdge server. The administrator suspects that a physical disk is failing, causing the RAID controller to slow down. The administrator wants to confirm the disk's health and identify any errors. What should the administrator do?

Check the Windows Event Viewer for disk errors.

Check the physical disk status in iDRAC and review the controller logs.

Run a consistency check on the virtual disk.

Replace the disk immediately based on the suspicion.

What is the purpose of the boot mode setting in the BIOS of a PowerEdge server?

Selects the operating system to boot

Configures the RAID level for the boot disk

Sets the password for booting the system

Determines whether the system uses UEFI or BIOS boot firmware

A storage administrator has a RAID 6 virtual disk on a PowerEdge server. The administrator wants to verify that the data on the virtual disk is consistent and that there are no latent errors. What should the administrator do?

Run a consistency check on the virtual disk.

What is the function of a storage controller in a PowerEdge server?

Provides power to the physical disks

Manages communication between the CPU and physical disks

Controls the server's cooling fans

Dell PowerEdge Operate

Domain 1Objective 3

Manage Storage of a PowerEdge Server POWEREDGE-OPERATE-V2 Practice Questions (Page 4)

Part of the Server Management domain, which accounts for 22% of the POWEREDGE-OPERATE-V2 exam.

32questions here

7free pages

8concepts

22%of the exam

Questions 16–20

16foundation · easy
Which operation is performed to create a new virtual disk on a PowerEdge server with a PERC controller?
Select an answer first
17expert · medium
A server administrator is troubleshooting a performance issue on a PowerEdge server. The administrator suspects that a physical disk is failing, causing the RAID controller to slow down. The administrator wants to confirm the disk's health and identify any errors. What should the administrator do?
Select an answer first
18foundation · easy
What is the purpose of the boot mode setting in the BIOS of a PowerEdge server?
Select an answer first
19application · medium
A storage administrator has a RAID 6 virtual disk on a PowerEdge server. The administrator wants to verify that the data on the virtual disk is consistent and that there are no latent errors. What should the administrator do?
Select an answer first
20foundation · easy
What is the function of a storage controller in a PowerEdge server?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to POWEREDGE-OPERATE-V2

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWEREDGE-OPERATE-V2” is a trademark of its owner, used for identification only.