A monitoring team wants to receive SNMP traps from iDRAC for hardware events. The administrator has configured the SNMP trap destination IP address in iDRAC. However, the monitoring team reports they are not receiving any traps. The administrator has verified that the iDRAC is reachable from the monitoring server. What is the most likely missing configuration?

The monitoring team's user account does not have the 'Administrator' role.

The iDRAC firmware is outdated.

The 'Alerts' option is not enabled in iDRAC.

The monitoring server is on a different subnet.

What is the purpose of power capping in iDRAC?

To provide backup power in case of a failure

To monitor the server's power consumption over time

To increase the server's performance by boosting power

To limit the maximum power consumption of the server

An administrator is using the iDRAC Virtual Console to troubleshoot a server that is stuck at a BIOS prompt. The administrator needs to send a 'Ctrl+Alt+Del' command to the server. What is the correct way to do this in the Virtual Console?

Press Ctrl+Alt+Del on the local keyboard.

Use the Virtual Console's 'Send Ctrl+Alt+Del' button or macro.

Use RACADM to send the command.

Use the iDRAC web interface's 'Power' menu to send the command.

What is the purpose of VLAN configuration in iDRAC network settings?

To provide redundancy for the iDRAC network connection

To increase the speed of the management network

To segment management traffic on a virtual LAN

To allow iDRAC to use multiple IP addresses

An administrator needs to update the iDRAC firmware on a remote PowerEdge server. The administrator has downloaded the firmware file to a local workstation. The iDRAC is accessible via the network. What is the recommended method to perform the update?

Use the server's OS to run the firmware update utility.

Use Lifecycle Controller by pressing F10 during POST.

Use the iDRAC web interface to upload the firmware image and initiate the update.

Use RACADM to update the firmware from the local workstation.

Dell PowerEdge Operate

Domain 1Objective 1

Manage iDRAC Settings POWEREDGE-OPERATE-V2 Practice Questions (Page 5)

Part of the Server Management domain, which accounts for 22% of the POWEREDGE-OPERATE-V2 exam.

37questions here

8free pages

12concepts

22%of the exam

Questions 21–25

21expert · medium
A monitoring team wants to receive SNMP traps from iDRAC for hardware events. The administrator has configured the SNMP trap destination IP address in iDRAC. However, the monitoring team reports they are not receiving any traps. The administrator has verified that the iDRAC is reachable from the monitoring server. What is the most likely missing configuration?
Select an answer first
22foundation · easy
What is the purpose of power capping in iDRAC?
Select an answer first
23expert · medium
An administrator is using the iDRAC Virtual Console to troubleshoot a server that is stuck at a BIOS prompt. The administrator needs to send a 'Ctrl+Alt+Del' command to the server. What is the correct way to do this in the Virtual Console?
Select an answer first
24foundation · easy
What is the purpose of VLAN configuration in iDRAC network settings?
Select an answer first
25application · medium
An administrator needs to update the iDRAC firmware on a remote PowerEdge server. The administrator has downloaded the firmware file to a local workstation. The iDRAC is accessible via the network. What is the recommended method to perform the update?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to POWEREDGE-OPERATE-V2

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWEREDGE-OPERATE-V2” is a trademark of its owner, used for identification only.