After applying a BIOS update via Lifecycle Controller, a server fails to boot. The administrator suspects the new BIOS version is incompatible. Which action should the administrator take to restore the server to its previous BIOS version?

Use iDRAC web GUI to reinstall the same BIOS update, which will overwrite the current version.

Use RACADM to reset the BIOS to factory defaults, which will restore the previous version.

Use Lifecycle Controller's Rollback feature to revert to the previous BIOS version.

Use Lifecycle Controller to reapply the BIOS update from the network share, which will automatically revert if issues occur.

Where in the iDRAC web interface can you initiate a firmware rollback for a component?

Maintenance > Firmware Rollback

An administrator is updating the firmware on a PowerEdge server using RACADM. After the update, the server's iDRAC is not responding. The administrator needs to recover the iDRAC. Which action should be taken?

Reset the iDRAC to factory defaults using the iDRAC web GUI.

Power cycle the server to restore the iDRAC firmware.

Use RACADM to reapply the same iDRAC firmware update.

Use Lifecycle Controller to roll back the iDRAC firmware.

Dell PowerEdge Operate

Domain 2Objective 2

Apply Firmware and BIOS Updates (via iDRAC, Lifecycle Controller, or CLI) POWEREDGE-OPERATE-V2 Practice Questions (Page 3)

Part of the Server Maintenance domain, which accounts for 16% of the POWEREDGE-OPERATE-V2 exam.

16questions here

4free pages

6concepts

16%of the exam

Questions 11–15

11application · medium
After applying a BIOS update via Lifecycle Controller, a server fails to boot. The administrator suspects the new BIOS version is incompatible. Which action should the administrator take to restore the server to its previous BIOS version?
Select an answer first
12foundation · easy
Which RACADM command is used to update the firmware of a component using a firmware image file?
Select an answer first
13foundation · easy
Which RACADM command displays the current firmware versions of components in the server?
Select an answer first
14foundation · easy
Where in the iDRAC web interface can you initiate a firmware rollback for a component?
Select an answer first
15application · medium
An administrator is updating the firmware on a PowerEdge server using RACADM. After the update, the server's iDRAC is not responding. The administrator needs to recover the iDRAC. Which action should be taken?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to POWEREDGE-OPERATE-V2

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWEREDGE-OPERATE-V2” is a trademark of its owner, used for identification only.

Apply Firmware and BIOS Updates (via iDRAC, Lifecycle Controller, or CLI) POWEREDGE-OPERATE-V2 Practice Questions (Page 3)

Questions 11–15

After applying a BIOS update via Lifecycle Controller, a server fails to boot. The administrator suspects the new BIOS version is incompatible. Which action should the administrator take to restore the server to its previous BIOS version?

Which RACADM command is used to update the firmware of a component using a firmware image file?

Which RACADM command displays the current firmware versions of components in the server?

Where in the iDRAC web interface can you initiate a firmware rollback for a component?

An administrator is updating the firmware on a PowerEdge server using RACADM. After the update, the server's iDRAC is not responding. The administrator needs to recover the iDRAC. Which action should be taken?

Keep studying — Server Maintenance