A Dell PowerEdge R440 server has a PERC H330 controller with 4 x 4 TB NL-SAS drives. The admin needs to configure the server to boot from a specific virtual disk that will be created. The server also has a separate boot SSD connected to the onboard SATA controller. What should the admin configure to ensure the server boots from the PERC virtual disk?

Set the PERC virtual disk as the first boot device in BIOS Boot Settings

Initialize the PERC drives as non-RAID

Set the SATA SSD as the first boot device

Disable the onboard SATA controller

A Dell PowerEdge R740 server has a PERC H740P controller with four 1.2 TB SAS drives. The admin needs to create a single virtual disk with maximum usable capacity and no redundancy for a scratch space. The drives are currently in a 'Ready' state. What should the admin do in the PERC BIOS configuration utility?

Create a RAID 10 virtual disk using all four drives

Initialize the drives as non-RAID disks and create a JBOD volume

Create a RAID 0 virtual disk using all four drives

Create a RAID 5 virtual disk using all four drives

Dell PowerEdge Operate

Domain 2Objective 1

Adjust Hardware Components Settings POWEREDGE-OPERATE-V2 Practice Questions (Page 4)

Part of the Server Maintenance domain, which accounts for 16% of the POWEREDGE-OPERATE-V2 exam.

24questions here

5free pages

8concepts

16%of the exam

Questions 16–20

16application · medium
A Dell PowerEdge R440 server has a PERC H330 controller with 4 x 4 TB NL-SAS drives. The admin needs to configure the server to boot from a specific virtual disk that will be created. The server also has a separate boot SSD connected to the onboard SATA controller. What should the admin configure to ensure the server boots from the PERC virtual disk?
Select an answer first
17foundation · easy
Which BIOS/UEFI processor setting on a Dell PowerEdge server would you use to disable unused processor cores to reduce power consumption?
Select an answer first
18application · medium
A Dell PowerEdge R740 server has a PERC H740P controller with four 1.2 TB SAS drives. The admin needs to create a single virtual disk with maximum usable capacity and no redundancy for a scratch space. The drives are currently in a 'Ready' state. What should the admin do in the PERC BIOS configuration utility?
Select an answer first
19foundation · easy
Which network adapter setting in the BIOS/UEFI or firmware allows a server to boot from a network image using PXE?
Select an answer first
20foundation · easy
What is the standard key to press during a Dell PowerEdge server's POST to access the BIOS/UEFI (System Setup) utility?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to POWEREDGE-OPERATE-V2

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWEREDGE-OPERATE-V2” is a trademark of its owner, used for identification only.

Adjust Hardware Components Settings POWEREDGE-OPERATE-V2 Practice Questions (Page 4)

Questions 16–20

Which BIOS/UEFI processor setting on a Dell PowerEdge server would you use to disable unused processor cores to reduce power consumption?

Which network adapter setting in the BIOS/UEFI or firmware allows a server to boot from a network image using PXE?

What is the standard key to press during a Dell PowerEdge server's POST to access the BIOS/UEFI (System Setup) utility?

Keep studying — Server Maintenance