Understand the MX7000 Troubleshooting Logs POWEREDGE-MX-MODULAR-DEPLOY Practice Questions (Page 2)

Questions 6–10

1. 6foundation · easy

   While reviewing MX7000 logs, an administrator sees an entry with the severity level 'Warning'. What does this indicate?

   • AA successful configuration change
   • BA potential issue that may require attention
   • CAn informational message about normal operation
   • DA critical failure that requires immediate action
   Reveal Solution Discussion Select an answer first
2. 7foundation · easy

   An administrator needs to provide MX7000 logs to Dell Support for troubleshooting. What is the recommended method to share the logs?

   • ATake screenshots of the logs and email them
   • BProvide the administrator's password to support for direct access
   • CVerbally describe the log contents to the support engineer
   • DExport the logs to a file and upload them to the support case
   Reveal Solution Discussion Select an answer first
4. 8foundation · easy

   Which MX7000 log type is primarily used to capture hardware status changes and alerts from components such as power supplies and fans?

   • ASystem log
   • BEvent log
   • CAudit log
   • DChassis log
   Reveal Solution Discussion Select an answer first
5. 9foundation · easy

   An administrator sees a log entry with the severity 'Info'. What is the appropriate interpretation?

   • AA security breach that must be reported
   • BA critical error that caused a system outage
   • CA warning that should be investigated
   • DA routine event that does not require immediate action
   Reveal Solution Discussion Select an answer first
6. 10expert · hard

   An MX7000 chassis experienced a thermal shutdown. The system log shows a temperature warning at 10:00, the event log shows a fan failure at 10:05, and the audit log shows a configuration change to fan speed at 09:55. The chassis shut down at 10:10. Which conclusion is most justified?

   • AThe fan speed configuration change at 09:55 likely contributed to the thermal shutdown, as it preceded the fan failure and temperature warning
   • BThe shutdown was caused by a power issue, not thermal
   • CThe fan failure at 10:05 was the sole cause of the thermal shutdown
   • DThe temperature warning at 10:00 was the root cause of the shutdown
   Reveal Solution Discussion Select an answer first