Identify the Commands to Configure and Verify LLDP, VLANs, STP, and LAG NETWORKING-FOUNDATIONS Practice Questions (Page 2)

Questions 6–10

1. 6foundation · easy

   Which command sets the bridge priority to 4096 for STP on a Dell switch?

   • Aspanning-tree priority 4096
   • Bbridge-priority 4096
   • Cspanning-tree bridge-priority 4096
   • Dstp priority 4096
   Reveal Solution Discussion Select an answer first
2. 7foundation · easy

   Which command shows LLDP statistics such as frames transmitted and received on a Dell switch?

   • Ashow lldp statistics
   • Bshow lldp counters
   • Cshow lldp info
   • Dshow lldp traffic
   Reveal Solution Discussion Select an answer first
4. 8foundation · easy

   Which command enables Spanning Tree Protocol globally on a Dell switch?

   • Aprotocol spanning-tree
   • Benable spanning-tree
   • Cstp enable
   • Dspanning-tree
   Reveal Solution Discussion Select an answer first
5. 9foundation · easy

   Which command shows the STP state of a specific interface on a Dell switch?

   • Ashow spanning-tree interface tengigabitethernet 1/0/1
   • Bshow stp interface tengigabitethernet 1/0/1
   • Cshow interface spanning-tree tengigabitethernet 1/0/1
   • Dshow spanning-tree port tengigabitethernet 1/0/1
   Reveal Solution Discussion Select an answer first
6. 10foundation · easy

   Which command assigns an access port to VLAN 10 on a Dell switch?

   • Avlan membership 10
   • Bswitchport access vlan 10
   • Cport vlan 10
   • Daccess vlan 10
   Reveal Solution Discussion Select an answer first