A small office has a router that provides internet access via a single public IP. The office has 20 computers that need to communicate with each other and access the internet. Which IPv4 addressing approach should the administrator use for the internal network?

Configure each computer with a link-local address from 169.254.0.0/16.

Use the loopback address 127.0.0.1 for all computers.

Assign each computer a public IP address from the same range as the router's WAN IP.

Use a private IP range such as 192.168.1.0/24 for the internal network and enable NAT on the router.

Which method of IPv4 address assignment automatically provides a device with an IP address, subnet mask, and default gateway from a server?

Automatic Private IP Addressing (APIPA)

Dynamic Host Configuration Protocol (DHCP)

Dell Networking Foundations

Domain 3Objective 2

Describe the Properties of IPv4 Addressing NETWORKING-FOUNDATIONS Practice Questions (Page 4)

Part of the IP Networking domain, which accounts for 25% of the NETWORKING-FOUNDATIONS exam.

31questions here

7free pages

9concepts

25%of the exam

Questions 16–20

16application · medium
A company has been assigned the public IP range 203.0.113.0/24. They need to create subnets that each support exactly 30 usable host addresses. What subnet mask should be used?
Select an answer first
17application · medium
A small office has a router that provides internet access via a single public IP. The office has 20 computers that need to communicate with each other and access the internet. Which IPv4 addressing approach should the administrator use for the internal network?
Select an answer first
18application · hard
A network engineer is designing a new branch office. The company has been allocated the network 172.16.0.0/16 and needs to create 8 subnets of equal size. What is the subnet mask and the network address of the third subnet?
Select an answer first
19application · medium
A network administrator is reviewing the configuration of a router interface. The interface has the IP address 192.168.1.130 with a subnet mask of 255.255.255.192. What is the network address of the subnet this interface belongs to?
Select an answer first
20foundation · easy
Which method of IPv4 address assignment automatically provides a device with an IP address, subnet mask, and default gateway from a server?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to NETWORKING-FOUNDATIONS

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “NETWORKING-FOUNDATIONS” is a trademark of its owner, used for identification only.

Describe the Properties of IPv4 Addressing NETWORKING-FOUNDATIONS Practice Questions (Page 4)

Questions 16–20

A company has been assigned the public IP range 203.0.113.0/24. They need to create subnets that each support exactly 30 usable host addresses. What subnet mask should be used?

A small office has a router that provides internet access via a single public IP. The office has 20 computers that need to communicate with each other and access the internet. Which IPv4 addressing approach should the administrator use for the internal network?

A network engineer is designing a new branch office. The company has been allocated the network 172.16.0.0/16 and needs to create 8 subnets of equal size. What is the subnet mask and the network address of the third subnet?

A network administrator is reviewing the configuration of a router interface. The interface has the IP address 192.168.1.130 with a subnet mask of 255.255.255.192. What is the network address of the subnet this interface belongs to?

Which method of IPv4 address assignment automatically provides a device with an IP address, subnet mask, and default gateway from a server?

Keep studying — IP Networking