A large enterprise runs a critical Oracle database on a SAN. The database requires consistent low-latency access to storage. The storage team is evaluating whether to use Fibre Channel or iSCSI. The existing network is a well-managed 10GbE LAN with low utilization. The budget is constrained, and the team wants to minimize new hardware. Which approach should they choose?

Use NAS with NFS to serve the database files

Deploy a dedicated Fibre Channel SAN with new switches and HBAs

Deploy iSCSI on the existing 10GbE network with dedicated VLANs and jumbo frames

Use FCoE with converged network adapters on the existing switches

A marketing department needs to share project files among 50 users running Windows and macOS workstations. The files are large graphics and video assets. The IT team wants a solution that is easy to set up, provides centralized management, and allows users to access files over the existing network without installing special software on clients. Which storage solution best fits this need?

A Fibre Channel SAN presented as a raw LUN to each workstation

A direct-attached storage (DAS) array connected to one user's workstation

An iSCSI target mounted directly on each workstation

A NAS appliance configured to serve files via SMB and NFS

A hospital is deploying a new electronic health records (EHR) system that requires low-latency, high-throughput access to a shared database cluster. The storage team must guarantee that no other traffic on the network can impact storage performance. The existing network is a standard Ethernet LAN. Which storage networking approach best meets these requirements?

Deploy a dedicated Fibre Channel SAN with a switched fabric topology

Implement FCoE on the existing Ethernet switches to carry storage traffic

Use iSCSI over the existing Ethernet network with jumbo frames enabled

Connect the database servers to a NAS appliance using NFS over the existing LAN

A storage administrator is troubleshooting a Fibre Channel SAN connectivity issue. A new server has been added to the fabric, and it can see the storage LUNs, but it cannot perform I/O operations. The zoning configuration appears correct. What is the most likely cause of this issue?

The server's operating system does not support Fibre Channel

The server's HBA is not logged into the fabric correctly

The Fibre Channel cable is damaged

The storage array's LUN masking is not configured to allow the new server's WWN

Dell Networking Foundations

Domain 2Objective 4

Describe Common Storage Networking Features and Benefits NETWORKING-FOUNDATIONS Practice Questions (Page 3)

Part of the Ethernet Technologies domain, which accounts for 40% of the NETWORKING-FOUNDATIONS exam.

30questions here

6free pages

7concepts

40%of the exam

Questions 11–15

11expert · hard
A large enterprise runs a critical Oracle database on a SAN. The database requires consistent low-latency access to storage. The storage team is evaluating whether to use Fibre Channel or iSCSI. The existing network is a well-managed 10GbE LAN with low utilization. The budget is constrained, and the team wants to minimize new hardware. Which approach should they choose?
Select an answer first
12application · easy
A small software company wants to implement a SAN for its virtualization hosts without purchasing new specialized hardware. The team is comfortable with TCP/IP networking and wants to leverage existing Gigabit Ethernet switches and cabling. Which storage networking protocol should they choose?
Select an answer first
13application · easy
A marketing department needs to share project files among 50 users running Windows and macOS workstations. The files are large graphics and video assets. The IT team wants a solution that is easy to set up, provides centralized management, and allows users to access files over the existing network without installing special software on clients. Which storage solution best fits this need?
Select an answer first
14application · medium
A hospital is deploying a new electronic health records (EHR) system that requires low-latency, high-throughput access to a shared database cluster. The storage team must guarantee that no other traffic on the network can impact storage performance. The existing network is a standard Ethernet LAN. Which storage networking approach best meets these requirements?
Select an answer first
15expert · hard
A storage administrator is troubleshooting a Fibre Channel SAN connectivity issue. A new server has been added to the fabric, and it can see the storage LUNs, but it cannot perform I/O operations. The zoning configuration appears correct. What is the most likely cause of this issue?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to NETWORKING-FOUNDATIONS

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “NETWORKING-FOUNDATIONS” is a trademark of its owner, used for identification only.

Describe Common Storage Networking Features and Benefits NETWORKING-FOUNDATIONS Practice Questions (Page 3)

Questions 11–15

A small software company wants to implement a SAN for its virtualization hosts without purchasing new specialized hardware. The team is comfortable with TCP/IP networking and wants to leverage existing Gigabit Ethernet switches and cabling. Which storage networking protocol should they choose?

A storage administrator is troubleshooting a Fibre Channel SAN connectivity issue. A new server has been added to the fabric, and it can see the storage LUNs, but it cannot perform I/O operations. The zoning configuration appears correct. What is the most likely cause of this issue?

Keep studying — Ethernet Technologies