An organization is planning a Dell networking solution that will connect a new storage array to existing servers. The team must ensure that the storage traffic does not interfere with normal data traffic. Which planning consideration is most important?

Use the same VLAN for both storage and data to simplify management.

Place the storage array in a different physical location without network segregation.

Disable flow control on all switches to reduce latency.

Design a separate storage network or VLAN for storage traffic.

A network team is planning a Dell switch deployment in a remote branch office. The site has limited power and cooling, and the team must minimize energy consumption. Which planning decision best addresses this constraint?

Select switches with lower power consumption and efficient cooling design.

Install additional cooling units to compensate for heat.

Use higher-speed transceivers to reduce the number of switches.

Place the switches in a non-ventilated closet to save space.

A data center is being designed with Dell switches that have front-to-back airflow. The cooling system uses hot aisle containment. Which equipment placement practice aligns with this design?

Install switches so that their front faces the cold aisle and rear faces the hot aisle.

Install switches with their rear facing the cold aisle.

Place switches in the hot aisle to reduce noise.

Use blanking panels only in the cold aisle.

A storage administrator is integrating a Dell storage array into an existing SAN. The array supports both Fibre Channel and iSCSI, but the current SAN infrastructure only has Fibre Channel switches. The team wants to minimize additional hardware purchases. Which connectivity approach should they plan for?

Connect the array directly to servers using SAS cables.

Use a gateway to convert Fibre Channel to iSCSI.

Use Fibre Channel connections to the existing SAN switches.

Deploy iSCSI over the existing Ethernet network.

A company is deploying a new Dell networking solution in a data center that currently has limited physical space. The network team must install two top-of-rack switches and a storage array in the same rack. The facility manager notes that the rack's power circuit is already near capacity. Which planning step should the team prioritize to avoid deployment delays?

Verify the power budget and available circuit capacity for the rack before installation.

Schedule a maintenance window for the storage array firmware update.

Order additional network cables for the storage array connections.

Configure the switches with the latest firmware before racking them.

Dell Networking Design

Domain 3Objective 1

Planning Fundamentals NETWORKING-DESIGN Practice Questions (Page 4)

Part of the Planning domain, which accounts for 51% of the NETWORKING-DESIGN exam.

24questions here

5free pages

3concepts

51%of the exam

Questions 16–20

16application · medium
An organization is planning a Dell networking solution that will connect a new storage array to existing servers. The team must ensure that the storage traffic does not interfere with normal data traffic. Which planning consideration is most important?
Select an answer first
17application · medium
A network team is planning a Dell switch deployment in a remote branch office. The site has limited power and cooling, and the team must minimize energy consumption. Which planning decision best addresses this constraint?
Select an answer first
18application · medium
A data center is being designed with Dell switches that have front-to-back airflow. The cooling system uses hot aisle containment. Which equipment placement practice aligns with this design?
Select an answer first
19application · medium
A storage administrator is integrating a Dell storage array into an existing SAN. The array supports both Fibre Channel and iSCSI, but the current SAN infrastructure only has Fibre Channel switches. The team wants to minimize additional hardware purchases. Which connectivity approach should they plan for?
Select an answer first
20application · medium
A company is deploying a new Dell networking solution in a data center that currently has limited physical space. The network team must install two top-of-rack switches and a storage array in the same rack. The facility manager notes that the rack's power circuit is already near capacity. Which planning step should the team prioritize to avoid deployment delays?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to NETWORKING-DESIGN

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “NETWORKING-DESIGN” is a trademark of its owner, used for identification only.

Planning Fundamentals NETWORKING-DESIGN Practice Questions (Page 4)

Questions 16–20

An organization is planning a Dell networking solution that will connect a new storage array to existing servers. The team must ensure that the storage traffic does not interfere with normal data traffic. Which planning consideration is most important?

A network team is planning a Dell switch deployment in a remote branch office. The site has limited power and cooling, and the team must minimize energy consumption. Which planning decision best addresses this constraint?

A data center is being designed with Dell switches that have front-to-back airflow. The cooling system uses hot aisle containment. Which equipment placement practice aligns with this design?

Keep studying — Planning