Planning Fundamentals NETWORKING-DESIGN Practice Questions (Page 3)

Questions 11–15

1. 11foundation · easy

   When integrating a Dell storage solution into an existing network, what is a key consideration for the storage network design to ensure performance and isolation?

   • APlacing storage traffic on a dedicated VLAN or separate network segment
   • BDisabling all security features on the storage network to reduce latency
   • CConnecting storage devices directly to the core switch without any segmentation
   • DUsing the same VLAN for both data and storage traffic to simplify management
   Reveal Solution Discussion Select an answer first
2. 12foundation · easy

   Which of the following is a key consideration during the planning phase of a Dell networking solution that directly impacts the scalability and future growth of the network?

   • ASelecting the switch model with the highest port density available
   • BPlanning for capacity headroom and modular expansion options
   • CDeferring all capacity planning until after the network is operational
   • DDesigning for current requirements only, to minimize initial costs
   Reveal Solution Discussion Select an answer first
4. 13foundation · easy

   During physical planning for a Dell networking deployment, what is the primary purpose of documenting cable types and lengths in the cabling plan?

   • ATo guarantee that the network will have zero packet loss
   • BTo ensure that all cables are the same color for aesthetic consistency
   • CTo reduce the overall cost of the cabling installation
   • DTo verify that the correct cable types are used for the required speeds and distances, and to facilitate future maintenance
   Reveal Solution Discussion Select an answer first
5. 14application · medium

   A data center is planning to install Dell switches in a rack that has a mix of front-to-back and back-to-front airflow equipment. The team is concerned about cooling efficiency. Which physical planning action is most appropriate?

   • AInstall all equipment with the same orientation regardless of airflow direction.
   • BSeparate equipment with different airflow directions into different racks or aisles.
   • CUse blanking panels to fill gaps between equipment.
   • DIncrease the fan speed on the switches to compensate.
   Reveal Solution Discussion Select an answer first
6. 15expert · hard

   A company is planning a new Dell networking solution that includes both a data network and a storage network. The data center has limited rack space and power. The team must decide whether to use a converged network (FCoE) or separate networks. Which factor is most critical in this decision?

   • AThe brand of the storage array being deployed.
   • BThe number of servers that will connect to the network.
   • CThe available power and cooling capacity in the data center.
   • DThe preferred management software for the network.
   Reveal Solution Discussion Select an answer first