A server administrator is remotely managing a server via its out-of-band management controller. The server has a failed hot-swappable fan. The administrator needs to replace the fan without causing downtime. Which action should the administrator take to ensure a safe replacement?

Update the server's BIOS to the latest version before replacing the fan.

Have the technician replace the fan immediately without any checks, as hot-swappable components are always safe to replace.

Use the out-of-band interface to check the server's thermal status and verify that the remaining fans can handle the load during the swap.

Instruct the on-site technician to power down the server before replacing the fan.

A server administrator needs to perform a BIOS update on a server that is located in a remote data center. The server is currently running a critical application and cannot be taken offline. The administrator has no physical access to the server. Which method should the administrator use to perform the BIOS update?

Use the out-of-band management interface to upload and flash the BIOS update.

Send a technician to the data center with a USB drive containing the BIOS update.

Schedule the BIOS update to run automatically during the next server reboot.

Use a remote desktop session to the server's operating system to run the BIOS update utility.

A server administrator is planning a firmware upgrade for a server's storage controller. The server is part of a two-node cluster running a critical database. The administrator has a maintenance window of 30 minutes. The firmware upgrade process takes approximately 20 minutes and requires a reboot. Which approach should the administrator take to minimize risk and downtime?

Skip the firmware upgrade because the risk of downtime is too high.

Fail over the database to the second node, upgrade the first node, then fail back and upgrade the second node.

Upgrade the firmware on both nodes simultaneously to ensure consistency and save time.

Upgrade the firmware on the first node, then immediately upgrade the second node without failover.

Which of the following is a potential risk associated with performing a firmware upgrade on a server component?

The firmware upgrade may fail and leave the component in an unusable state.

The server's operating system may become incompatible with the new firmware.

The server's data will be automatically erased during the upgrade.

The server's warranty will be voided by the upgrade.

CompTIAServer+

Domain 1Objective 3

Perform Hardware Maintenance SK0-005 Practice Questions (Page 3)

Part of the Server hardware installation and management domain, which accounts for 18% of the SK0-005 exam. CompTIA does not publish an official question count, but from its 90-minute exam (~35–60 total, ~6–11 in this domain), expect 2–4 from this objective — we provide 21 practice questions to prepare you well beyond it. (estimate)

21questions here

5free pages

6concepts

18%of the exam

Questions 11–15

11application · medium
A server administrator is remotely managing a server via its out-of-band management controller. The server has a failed hot-swappable fan. The administrator needs to replace the fan without causing downtime. Which action should the administrator take to ensure a safe replacement?
Select an answer first
12foundation · easy
Which of the following server components is typically hot-swappable?
Select an answer first
13application · medium
A server administrator needs to perform a BIOS update on a server that is located in a remote data center. The server is currently running a critical application and cannot be taken offline. The administrator has no physical access to the server. Which method should the administrator use to perform the BIOS update?
Select an answer first
14expert · hard
A server administrator is planning a firmware upgrade for a server's storage controller. The server is part of a two-node cluster running a critical database. The administrator has a maintenance window of 30 minutes. The firmware upgrade process takes approximately 20 minutes and requires a reboot. Which approach should the administrator take to minimize risk and downtime?
Select an answer first
15foundation · easy
Which of the following is a potential risk associated with performing a firmware upgrade on a server component?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to SK0-005

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by CompTIA. “SK0-005” is a trademark of its owner, used for identification only.

Perform Hardware Maintenance SK0-005 Practice Questions (Page 3)

Questions 11–15

A server administrator is remotely managing a server via its out-of-band management controller. The server has a failed hot-swappable fan. The administrator needs to replace the fan without causing downtime. Which action should the administrator take to ensure a safe replacement?

Which of the following server components is typically hot-swappable?

Which of the following is a potential risk associated with performing a firmware upgrade on a server component?

Keep studying — Server hardware installation and management