An administrator needs to replace a failed hard drive in a server that is currently running. The server supports hot-swap drives. What should the administrator do first?

Verify that the drive is part of a RAID array that can tolerate a drive failure.

Shut down the server to safely replace the drive.

Remove the drive immediately to prevent further damage.

Power off the server and then replace the drive.

Which of the following is a characteristic of out-of-band management for servers?

It uses the same network interface as the operating system for all management traffic.

It is only available on servers with a graphical desktop environment installed.

It requires the server's operating system to be fully booted and network services running.

It provides a separate, dedicated channel for management that is available even when the server is powered off.

Which of the following tasks can be performed using an out-of-band management interface?

Installing a new operating system by inserting a physical installation DVD into the server's optical drive.

Viewing the server's BIOS/UEFI configuration screens remotely.

Replacing a failed power supply unit in the server chassis.

Upgrading the server's RAM by sending a command to the memory controller.

When replacing a hot-swappable power supply in a server, what should the administrator verify before removing the failed unit?

The server's operating system is shut down gracefully.

The replacement power supply has the same wattage and connector types.

The server is connected to a UPS to prevent power loss.

The server's fans are spinning at maximum speed to cool the system during the replacement.

A server administrator is replacing a failed hot-swappable power supply in a server. The server is running a critical application and cannot be shut down. The administrator has a replacement power supply of the same model. Which action should the administrator take to ensure a safe replacement?

Remove all power supplies from the server before inserting the new one to ensure a clean swap.

Shut down the server before replacing the power supply to prevent electrical damage.

Remove the failed power supply and immediately insert the new one, ensuring it clicks into place.

Replace the power supply only after the server's BIOS has been updated.

CompTIAServer+

Domain 1Objective 3

Perform Hardware Maintenance SK0-005 Practice Questions (Page 2)

Part of the Server hardware installation and management domain, which accounts for 18% of the SK0-005 exam. CompTIA does not publish an official question count, but from its 90-minute exam (~35–60 total, ~6–11 in this domain), expect 2–4 from this objective — we provide 21 practice questions to prepare you well beyond it. (estimate)

21questions here

5free pages

6concepts

18%of the exam

Questions 6–10

6foundation · easy
An administrator needs to replace a failed hard drive in a server that is currently running. The server supports hot-swap drives. What should the administrator do first?
Select an answer first
7foundation · easy
Which of the following is a characteristic of out-of-band management for servers?
Select an answer first
8foundation · easy
Which of the following tasks can be performed using an out-of-band management interface?
Select an answer first
9foundation · easy
When replacing a hot-swappable power supply in a server, what should the administrator verify before removing the failed unit?
Select an answer first
10application · medium
A server administrator is replacing a failed hot-swappable power supply in a server. The server is running a critical application and cannot be shut down. The administrator has a replacement power supply of the same model. Which action should the administrator take to ensure a safe replacement?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to SK0-005

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by CompTIA. “SK0-005” is a trademark of its owner, used for identification only.