Tools and Protocols N10-009 Practice Questions (Page 10)

Questions 46–50

1. 46application · medium

   A technician needs to download a firmware update file from a vendor's FTP server. The technician knows the server's IP address, username, and password. Which command-line tool would the technician use to perform this download?

   • A`tftp 192.168.1.50`
   • B`ftp 192.168.1.50`
   • C`ssh user@192.168.1.50`
   • D`scp user@192.168.1.50:/file.bin .`
   Reveal Solution Discussion Select an answer first
2. 47foundation · easy

   What does tcpdump do when run without any filters?

   • AScans for open ports
   • BCaptures all packets on the specified interface
   • COnly captures packets to and from localhost
   • DDisplays the routing table
   Reveal Solution Discussion Select an answer first
4. 48foundation · easy

   A technician wants to see all active TCP connections on a Windows host, including the local and remote addresses and port numbers. Which command displays this information?

   • Aarp
   • Bping
   • Cnslookup
   • Dnetstat
   Reveal Solution Discussion Select an answer first
5. 49foundation · easy

   What is the primary purpose of SNMP?

   • ATo manage and monitor network devices
   • BTo assign IP addresses to clients
   • CTo securely transfer files between hosts
   • DTo resolve domain names to IP addresses
   Reveal Solution Discussion Select an answer first
6. 50application · medium

   A network analyst is using Wireshark to investigate a slow application. The analyst has captured traffic and wants to isolate only the TCP packets exchanged with the application server at 10.1.1.50 on port 443. Which display filter should be applied in Wireshark?

   • A`ip.src == 10.1.1.50`
   • B`tcp.port == 443`
   • C`ip.addr == 10.1.1.50 && tcp.port == 443`
   • D`http`
   Reveal Solution Discussion Select an answer first