Documentation N10-009 Practice Questions (Page 1)

Questions 1–5

1. 1foundation · easy

   What is the primary purpose of a Standard Operating Procedure (SOP) in network operations?

   • ATo document only emergency procedures
   • BTo increase the complexity of network tasks
   • CTo ensure tasks are performed consistently and efficiently
   • DTo replace the need for network monitoring
   Reveal Solution Discussion Select an answer first
2. 2foundation · easy

   Why is it important to document network device configurations?

   • ATo increase the number of devices on the network
   • BTo automatically optimize network performance
   • CTo replace the need for backups
   • DTo facilitate troubleshooting and recovery after failures
   Reveal Solution Discussion Select an answer first
4. 3application · medium

   A network administrator is investigating a report of slow application performance. The administrator has a baseline that shows normal latency between the user's switch and the application server is 5 ms. Current latency is measured at 50 ms. The administrator also notices that the network diagram shows a direct fiber link between the two devices. What is the MOST likely conclusion based on this information?

   • AThe network diagram is wrong because the latency is too high for a direct fiber link.
   • BThe performance deviation is significant and warrants further investigation into the path between the devices.
   • CThe baseline is incorrect and should be updated to reflect the current latency.
   • DThe application server is overloaded and needs to be rebooted.
   Reveal Solution Discussion Select an answer first
5. 4application · medium

   A network administrator is documenting a recent security incident where an unauthorized device was connected to an open port and gained access to the network. The administrator wants to ensure that similar incidents are prevented in the future. Which documentation practice would be MOST effective in achieving this goal?

   • AUpdate the network performance baseline to reflect the new device's traffic.
   • BAdd the unauthorized device to the inventory management records.
   • CRecord the incident in the change management log and close the ticket.
   • DDocument the incident details, including the root cause, and update the standard operating procedures to include port security configuration checks.
   Reveal Solution Discussion Select an answer first
6. 5foundation · easy

   When troubleshooting a physical connectivity issue, which document would be most helpful?

   • AWiring schematic
   • BVendor datasheet
   • CIP address documentation
   • DLogical topology diagram
   Reveal Solution Discussion Select an answer first