CompTIANetwork+
Domain 5Objective 2
Cabling and Physical Interface Issues N10-009 Practice Questions (Page 2)
Part of the Network troubleshooting domain, which makes up ~15% of our current practice bank. CompTIA does not publish an official question count, but from its 90-minute exam (~35–60 total, ~5–9 in this domain), expect 1–2 from this objective — we provide 28 practice questions to prepare you well beyond it. (estimate)
28questions here
6free pages
8concepts
Questions 6–10
- 6
A technician is setting up a new IP phone for a user. The phone has a built-in switch, and the technician needs to connect the phone to the network and the user's computer to the phone. Which cable type should the technician use to connect the phone to the wall jack?
Select an answer first - 7
A network technician is troubleshooting a user's workstation that cannot connect to the network. The link light on the NIC is off. The technician wants to verify that the cable from the wall jack to the patch panel is the correct one and is properly connected. Which tool should the technician use first?
Select an answer first - 8
What is the term for the weakening of a signal as it travels through a cable?
Select an answer first - 9
Which tool is used to verify that the wires in a twisted pair cable are connected to the correct pins at both ends?
Select an answer first - 10
Which cable type uses light pulses to transmit data and is immune to electromagnetic interference?
Select an answer first
Finished these 5 questions?
Review the revealed explanations, or continue through the curriculum.
Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by CompTIA. “N10-009” is a trademark of its owner, used for identification only.