A Citrix ADC VPX is being deployed in a segmented network. The management network is on VLAN 10, and the data network is on VLAN 20. The administrator needs to ensure that the management GUI is accessible only from the management network. What should be configured?

Configure a static route to the management network

Enable management access on all interfaces

A Citrix ADC VPX is being deployed in a cloud environment with the following requirements: management access must be restricted to a specific IP range (203.0.113.0/24), and the appliance must be able to reach the internet for license validation. The NSIP is assigned a public IP (198.51.100.10) and the default gateway is set. The administrator can ping the NSIP from the allowed range, but cannot access the GUI. What is the most likely cause?

The management access is restricted to the NSIP's subnet

The default gateway is incorrect

When configuring the IP address of a Citrix ADC, which of the following is the correct command syntax to set the NSIP?

config ns ip 192.168.1.10 255.255.255.0

set ns config -ip 192.168.1.10 -netmask 255.255.255.0

set network ip 192.168.1.10 255.255.255.0

set ns ip 192.168.1.10 -netmask 255.255.255.0

What is the purpose of the 'show ns config' command?

To display the current configuration of the Citrix ADC

To change the configuration of the Citrix ADC

An administrator is configuring a new Citrix ADC VPX in a test lab. The appliance must be reachable from the management workstation at 172.16.10.50, which is on a different subnet. The NSIP is set to 172.16.20.10/24. The administrator can ping the NSIP from the workstation, but cannot access the GUI. What is the most likely cause?

The NSIP is not in the same subnet as the workstation

The default gateway is not configured on the ADC

The management GUI is disabled by default

The NSIP is not assigned to a VLAN

CitrixCertified Associate – App Delivery and Security (CCA-AppDS) – Traffic Management

Domain 1Objective 3

Perform Initial ADC Configuration CCA-APPDS-TRAFFIC-MANAGEMENT Practice Questions (Page 4)

Part of the Domain 1: Getting Started with Citrix ADC domain, which makes up ~11% of our current practice bank.

23questions here

5free pages

6concepts

Questions 16–20

16application · medium
A Citrix ADC VPX is being deployed in a segmented network. The management network is on VLAN 10, and the data network is on VLAN 20. The administrator needs to ensure that the management GUI is accessible only from the management network. What should be configured?
Select an answer first
17expert · hard
A Citrix ADC VPX is being deployed in a cloud environment with the following requirements: management access must be restricted to a specific IP range (203.0.113.0/24), and the appliance must be able to reach the internet for license validation. The NSIP is assigned a public IP (198.51.100.10) and the default gateway is set. The administrator can ping the NSIP from the allowed range, but cannot access the GUI. What is the most likely cause?
Select an answer first
18foundation · easy
When configuring the IP address of a Citrix ADC, which of the following is the correct command syntax to set the NSIP?
Select an answer first
19foundation · easy
What is the purpose of the 'show ns config' command?
Select an answer first
20application · medium
An administrator is configuring a new Citrix ADC VPX in a test lab. The appliance must be reachable from the management workstation at 172.16.10.50, which is on a different subnet. The NSIP is set to 172.16.20.10/24. The administrator can ping the NSIP from the workstation, but cannot access the GUI. What is the most likely cause?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to CCA-APPDS-TRAFFIC-MANAGEMENT

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Citrix. “CCA-APPDS-TRAFFIC-MANAGEMENT” is a trademark of its owner, used for identification only.

Perform Initial ADC Configuration CCA-APPDS-TRAFFIC-MANAGEMENT Practice Questions (Page 4)

Questions 16–20

A Citrix ADC VPX is being deployed in a segmented network. The management network is on VLAN 10, and the data network is on VLAN 20. The administrator needs to ensure that the management GUI is accessible only from the management network. What should be configured?

When configuring the IP address of a Citrix ADC, which of the following is the correct command syntax to set the NSIP?

What is the purpose of the 'show ns config' command?

Keep studying — Domain 1: Getting Started with Citrix ADC