Monitor the Environment Using Logs and SNMP CCA-APPDS-TRAFFIC-MANAGEMENT Practice Questions (Page 4)

Questions 16–20

1. 16expert · hard

   An administrator is troubleshooting a Citrix ADC that is intermittently dropping connections. SNMP monitoring shows high CPU utilization spikes, but the administrator cannot correlate the spikes with specific traffic patterns. The administrator wants to use SNMP to gather more detailed data to identify the cause. Which approach should the administrator take?

   • AUse the Citrix ADC MIB to query detailed statistics for each vserver and service during the spikes.
   • BPoll the ADC more frequently using the standard MIB-II OIDs.
   • CIncrease the SNMP community string complexity to improve data accuracy.
   • DEnable SNMP traps for CPU utilization and configure the trap receiver to alert on high thresholds.
   Reveal Solution Discussion Select an answer first
2. 17expert · hard

   A Citrix ADC is experiencing intermittent service outages. SNMP monitoring shows that the ADC's CPU utilization spikes to 100% during the outages, but the administrator cannot identify the cause. The administrator suspects that a specific feature is consuming CPU. Which SNMP data should the administrator analyze to confirm this?

   • AThe SNMP trap log for CPU-related alerts.
   • BThe total CPU utilization OID from the Citrix ADC MIB.
   • CThe standard MIB-II system OIDs.
   • DThe per-feature CPU utilization OIDs from the Citrix ADC MIB.
   Reveal Solution Discussion Select an answer first
4. 18application · medium

   An organization uses an SNMP-based monitoring tool to track Citrix ADC health. The monitoring tool must receive traps for critical events, but the security team wants to restrict which hosts can query the ADC via SNMP. Which configuration should the administrator implement?

   • AConfigure SNMP traps to be sent to the monitoring tool's IP and restrict SNMP queries to that IP by adding it as an SNMP manager.
   • BConfigure an SNMP community with read-write access and add the monitoring tool's IP as an SNMP manager.
   • CEnable SNMP on the ADC and set the community string to a strong value, but do not restrict manager IPs.
   • DConfigure an SNMP community with read-only access and add the monitoring tool's IP as an SNMP manager.
   Reveal Solution Discussion Select an answer first
5. 19foundation · easy

   Which Citrix ADC command is used to add an SNMP manager that is allowed to query the device?

   • Aset snmp trap <ip>
   • Bset snmp manager <ip>
   • Cadd snmp manager <ip>
   • Dadd snmp community <ip>
   Reveal Solution Discussion Select an answer first
6. 20application · medium

   A Citrix ADC is configured to send syslog messages to a central log server. The administrator notices that some log messages are missing on the server. The ADC's syslog configuration appears correct. Which additional step should the administrator take to ensure reliable log delivery?

   • AConfigure the ADC to send syslog messages to multiple servers.
   • BVerify that the syslog server is reachable from the ADC and that UDP port 514 is not blocked.
   • CChange the syslog server to use TCP port 514 instead of UDP.
   • DIncrease the syslog log level to DEBUG to ensure all messages are sent.
   Reveal Solution Discussion Select an answer first