A hospital is deploying SD-Access across three buildings. The network team wants to use a single routed access layer with OSPF as the underlay. They plan to use Cisco DNA Center for automation. Which design choice is most appropriate for the fabric border nodes?

Use only Layer 2 borders to extend VLANs across the campus.

Use a single pair of border nodes in the core and connect them to the fabric edge via the underlay.

Configure every edge node as a border to avoid a single point of failure.

Place border nodes in each building and run OSPF between them and the core.

A financial firm is deploying SD-Access with a redundant pair of border nodes. They need to connect to an external network that only supports static routing. They also need to share a common set of services (e.g., DHCP, DNS) with the fabric. The network team wants to minimize configuration complexity. Which approach should they take?

Use L2 handoff to extend the shared services VLAN to the borders.

Configure L3 handoff with static routes on both borders and use anycast for shared services.

Use BGP to the external network and redistribute static routes.

Use a single border node to simplify static routing.

CCIE Enterprise Infrastructure

Domain 2Objective 1

Cisco SD-Access CCIE-ENTERPRISE-INFRASTRUCTURE Practice Questions (Page 3)

Part of the Software-Defined Infrastructure domain, which accounts for 25% of the CCIE-ENTERPRISE-INFRASTRUCTURE exam. Cisco does not publish an official question count, but from its 120-minute exam (~50–80 total, ~13–20 in this domain), expect 7–10 from this objective — we provide 48 practice questions to prepare you well beyond it. (estimate)

48questions here

10free pages

6concepts

25%of the exam

Questions 11–15

11foundation · easy
In Cisco DNA Center, what is the first step in deploying an SD-Access fabric after devices are onboarded?
Select an answer first
12foundation · easy
Which border handoff option in SD-Access is used to extend a Layer 2 network from the fabric to an external device or network?
Select an answer first
13application · medium
A hospital is deploying SD-Access across three buildings. The network team wants to use a single routed access layer with OSPF as the underlay. They plan to use Cisco DNA Center for automation. Which design choice is most appropriate for the fabric border nodes?
Select an answer first
14application · medium
A campus network is implementing SD-Access with a routed access layer. They want to use IS-IS as the underlay routing protocol. Which device role should be assigned to the access switches?
Select an answer first
15expert · hard
A financial firm is deploying SD-Access with a redundant pair of border nodes. They need to connect to an external network that only supports static routing. They also need to share a common set of services (e.g., DHCP, DNS) with the fabric. The network team wants to minimize configuration complexity. Which approach should they take?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to CCIE-ENTERPRISE-INFRASTRUCTURE

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Cisco. “CCIE-ENTERPRISE-INFRASTRUCTURE” is a trademark of its owner, used for identification only.

Cisco SD-Access CCIE-ENTERPRISE-INFRASTRUCTURE Practice Questions (Page 3)

Questions 11–15

In Cisco DNA Center, what is the first step in deploying an SD-Access fabric after devices are onboarded?

Which border handoff option in SD-Access is used to extend a Layer 2 network from the fabric to an external device or network?

A hospital is deploying SD-Access across three buildings. The network team wants to use a single routed access layer with OSPF as the underlay. They plan to use Cisco DNA Center for automation. Which design choice is most appropriate for the fabric border nodes?

A campus network is implementing SD-Access with a routed access layer. They want to use IS-IS as the underlay routing protocol. Which device role should be assigned to the access switches?

Keep studying — Software-Defined Infrastructure