A large enterprise is designing a multi-site SD-Access fabric. They have a hub-and-spoke WAN topology. They want to minimize the number of border nodes and reduce WAN bandwidth usage. Which fabric design should they choose?

Deploy a border at the hub site and use a Layer 3 handoff to connect the spoke sites as separate fabrics.

Deploy a border at each site and use LISP for inter-site traffic.

Deploy a border at each site and use VXLAN for inter-site traffic.

Deploy a single border at the hub site and extend the fabric to the spoke sites.

A service provider is deploying SD-Access for a customer. They have already onboarded the devices and created the fabric site. Now they need to provision the fabric nodes with the appropriate roles. Which step should they take in DNA Center?

Assign the devices to the fabric site and then configure the roles (edge, border, control plane).

Use the 'Fabric Provisioning' workflow to automatically assign roles based on device type.

Use the 'Network Settings' page to assign roles.

Configure the roles first, then assign the devices to the fabric site.

A company is implementing SD-Access and wants to connect their fabric to an external network that uses BGP. They need to advertise certain subnets from the fabric to the external network and also receive routes. Which border handoff configuration should be used?

Layer 3 handoff with BGP peering between the border and the external router.

Layer 2 handoff with VRF-lite and BGP.

Layer 3 handoff with static routes only.

Layer 2 handoff with BGP peering over a VLAN.

CCIE Enterprise Infrastructure

Domain 2Objective 1

Cisco SD-Access CCIE-ENTERPRISE-INFRASTRUCTURE Practice Questions (Page 10)

Part of the Software-Defined Infrastructure domain, which accounts for 25% of the CCIE-ENTERPRISE-INFRASTRUCTURE exam. Cisco does not publish an official question count, but from its 120-minute exam (~50–80 total, ~13–20 in this domain), expect 7–10 from this objective — we provide 48 practice questions to prepare you well beyond it. (estimate)

48questions here

10free pages

6concepts

25%of the exam

Questions 46–48

46application · hard
A large enterprise is designing a multi-site SD-Access fabric. They have a hub-and-spoke WAN topology. They want to minimize the number of border nodes and reduce WAN bandwidth usage. Which fabric design should they choose?
Select an answer first
47application · medium
A service provider is deploying SD-Access for a customer. They have already onboarded the devices and created the fabric site. Now they need to provision the fabric nodes with the appropriate roles. Which step should they take in DNA Center?
Select an answer first
48application · medium
A company is implementing SD-Access and wants to connect their fabric to an external network that uses BGP. They need to advertise certain subnets from the fabric to the external network and also receive routes. Which border handoff configuration should be used?
Select an answer first

Finished these 3 questions?

Review the revealed explanations, or continue through the curriculum.

No more pagesBack to CCIE-ENTERPRISE-INFRASTRUCTURE

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Cisco. “CCIE-ENTERPRISE-INFRASTRUCTURE” is a trademark of its owner, used for identification only.