An organization wants to use EEM to trigger a Python script in the Guest shell when a specific syslog message is generated. The script needs to parse the syslog message and perform actions based on its content. The engineer wants to ensure that the script receives the entire syslog message as an argument. Which EEM action should be used?

action 1.0 cli command "guestshell run python3 /path/script.py $_syslog_msg"

action 1.0 cli command "guestshell run python3 /path/script.py"

action 1.0 cli command "guestshell run python3 /path/script.py $_event_type"

action 1.0 cli command "guestshell run python3 /path/script.py $_syslog_severity"

A network administrator has enabled the Guest shell on an IOS XE device. After some time, the administrator notices that the Guest shell is consuming excessive memory and causing performance issues. The administrator wants to disable the Guest shell temporarily without uninstalling it. What should the administrator do?

Use the 'guestshell stop' command to stop the Guest shell

Use the 'no guestshell' command to disable the Guest shell

Use the 'guestshell disable' command to stop the Guest shell

Use the 'guestshell destroy' command to remove the Guest shell

An engineer is configuring an EEM applet to respond to a CLI command event. The applet should execute a series of commands and then send a syslog message. The engineer wants to ensure that the applet only triggers when a specific command is entered by a user with privilege level 15. Which configuration is correct?

event cli command "show version" sync no skip no action 1.0 cli command "show clock" action 2.0 syslog msg "Command executed"

event cli command "show version" sync no skip no pattern ".*" action 1.0 cli command "show clock" action 2.0 syslog msg "Command executed"

event cli command "show version" pattern ".*" action 1.0 cli command "show clock" action 2.0 syslog msg "Command executed"

event cli command "show version" sync yes skip yes action 1.0 cli command "show clock" action 2.0 syslog msg "Command executed"

A network administrator is running a Python script in the Guest shell that performs heavy computations. The script is consuming too much CPU, causing the device's control plane to be sluggish. The administrator wants to limit the CPU usage of the Guest shell without stopping the script. What should the administrator do?

Use the 'guestshell cpu limit' command to set a CPU limit

Edit the /etc/rc.local file inside the Guest shell to limit CPU

Use the 'process cpu limit' command in IOS XE to limit the Guest shell process

Use the 'guestshell resource cpu limit' command to set a CPU limit

CCIE Enterprise Infrastructure

Domain 5Objective 2

Automation and Scripting CCIE-ENTERPRISE-INFRASTRUCTURE Practice Questions (Page 5)

Part of the Infrastructure Automation and Programmability domain, which accounts for 15% of the CCIE-ENTERPRISE-INFRASTRUCTURE exam. Cisco does not publish an official question count, but from its 120-minute exam (~50–80 total, ~8–12 in this domain), expect 3–4 from this objective — we provide 36 practice questions to prepare you well beyond it. (estimate)

36questions here

8free pages

9concepts

15%of the exam

Questions 21–25

21expert · medium
An organization wants to use EEM to trigger a Python script in the Guest shell when a specific syslog message is generated. The script needs to parse the syslog message and perform actions based on its content. The engineer wants to ensure that the script receives the entire syslog message as an argument. Which EEM action should be used?
Select an answer first
22expert · medium
A network administrator has enabled the Guest shell on an IOS XE device. After some time, the administrator notices that the Guest shell is consuming excessive memory and causing performance issues. The administrator wants to disable the Guest shell temporarily without uninstalling it. What should the administrator do?
Select an answer first
23expert · hard
An engineer is configuring an EEM applet to respond to a CLI command event. The applet should execute a series of commands and then send a syslog message. The engineer wants to ensure that the applet only triggers when a specific command is entered by a user with privilege level 15. Which configuration is correct?
Select an answer first
24expert · medium
A network administrator is running a Python script in the Guest shell that performs heavy computations. The script is consuming too much CPU, causing the device's control plane to be sluggish. The administrator wants to limit the CPU usage of the Guest shell without stopping the script. What should the administrator do?
Select an answer first
25application · easy
A network engineer wants to use Python to automate the collection of 'show' command outputs from an IOS XE device. The engineer plans to run the Python script on the device itself. Which environment should the engineer use?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to CCIE-ENTERPRISE-INFRASTRUCTURE

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Cisco. “CCIE-ENTERPRISE-INFRASTRUCTURE” is a trademark of its owner, used for identification only.

Automation and Scripting CCIE-ENTERPRISE-INFRASTRUCTURE Practice Questions (Page 5)

Questions 21–25

A network engineer wants to use Python to automate the collection of 'show' command outputs from an IOS XE device. The engineer plans to run the Python script on the device itself. Which environment should the engineer use?

Keep studying — Infrastructure Automation and Programmability