Automation and Scripting CCIE-ENTERPRISE-INFRASTRUCTURE Practice Questions (Page 4)

Questions 16–20

1. 16foundation · easy

   Which command is used to verify the configuration of an EEM applet on IOS XE?

   • Ashow event manager policy available
   • Bshow running-config | section event manager
   • Cshow event manager history events
   • Dshow event manager policy active
   Reveal Solution Discussion Select an answer first
2. 17foundation · easy

   Which debug command is useful for troubleshooting EEM applet execution?

   • Adebug snmp packets
   • Bdebug platform software
   • Cdebug ip routing
   • Ddebug event manager action cli
   Reveal Solution Discussion Select an answer first
4. 18foundation · easy

   What is the purpose of the Guest shell in IOS XE?

   • ATo provide a virtual machine for running Windows applications
   • BTo provide a Linux-based environment for running Python scripts and other tools
   • CTo store configuration files for the device
   • DTo allow remote access to the device via SSH
   Reveal Solution Discussion Select an answer first
5. 19application · medium

   A network engineer needs to automatically run a Python script in the Guest shell whenever a specific syslog message appears on an IOS XE device. The script must receive the interface name from the syslog message as an argument. Which configuration approach should the engineer use?

   • ASet up a NetFlow export to a collector that runs the script when it receives the syslog message
   • BUse the 'event manager policy' command to load a Tcl script that directly executes Python code without using the Guest shell
   • CCreate an EEM applet with a syslog event trigger and an action that uses 'action 1.0 cli command "guestshell run python3 /path/script.py $_syslog_msg"'
   • DConfigure a cron job inside the Guest shell to run the script every minute and parse the syslog file for new messages
   Reveal Solution Discussion Select an answer first
6. 20expert · hard

   A network engineer has configured an EEM applet to run a CLI command when a syslog message is received. The applet is registered, but when the syslog message occurs, the CLI command does not execute. The engineer has verified that the event pattern matches. What is the most likely cause and solution?

   • AThe syslog message is not being sent to the device's logging buffer; configure logging buffered
   • BThe applet is not registered; re-register it with 'event manager policy'
   • CThe CLI command is incorrect; use 'action 1.0 cli command "show version"' instead
   • DThe applet is not in privileged mode; add 'action 1.0 cli command "enable"' before the command
   Reveal Solution Discussion Select an answer first