6.3 Explain Cisco UCS Devices and Their Placement in UCS Architecture 800-150 Practice Questions (Page 4)

Questions 16–20

1. 16expert · hard

   A UCS administrator is planning to add a new chassis to an existing UCS domain. The chassis will be placed in a different row in the data center. What is the primary consideration when connecting the new chassis to the existing fabric interconnects?

   • AThe chassis must have its own management IP address
   • BThe chassis must use a different firmware version
   • CThe chassis must be in the same rack as the fabric interconnects
   • DThe distance between the chassis and the fabric interconnects must support the cable type
   Reveal Solution Discussion Select an answer first
2. 17application · medium

   A UCS administrator is configuring a new chassis in an existing UCS domain. The chassis has two IOMs. How should the IOMs be connected to the fabric interconnects to ensure redundancy?

   • AConnect both IOMs to the same fabric interconnect
   • BConnect one IOM to the core switch and the other to the fabric interconnect
   • CConnect the IOMs to each other and then to the fabric interconnect
   • DConnect each IOM to a different fabric interconnect
   Reveal Solution Discussion Select an answer first
4. 18application · medium

   A UCS domain is being deployed with two fabric interconnects. The administrator wants to ensure that server traffic can be load-balanced across both fabric interconnects. What is required for this to work?

   • AThe fabric interconnects must be connected to each other
   • BThe chassis must have a single IOM
   • CThe servers must be connected to both fabric interconnects
   • DThe servers must use only one VIC
   Reveal Solution Discussion Select an answer first
5. 19application · medium

   A UCS administrator is troubleshooting a connectivity issue for a blade server. The blade is installed in a chassis that is connected to a fabric interconnect. Which component is directly responsible for forwarding traffic from the blade to the fabric interconnect?

   • AThe I/O module (IOM) in the chassis
   • BThe blade's local disk controller
   • CThe chassis power supply unit
   • DThe fabric interconnect's management port
   Reveal Solution Discussion Select an answer first
6. 20application · medium

   A company operates a main office, a remote branch, and a data center. The branch office needs to access applications hosted in the data center. Which network location is responsible for providing the branch office's connectivity to the data center?

   • AThe edge location, which connects the branch to the WAN
   • BThe access layer in the data center, which provides internet access
   • CThe campus network, which provides local access for branch users
   • DThe data center's core layer, which directly connects to branch offices
   Reveal Solution Discussion Select an answer first