CiscoCertified Field Technician (CCT)
Domain 1Objective 3
1.3 Describe Network Cabling at Layer 1 800-150 Practice Questions (Page 3)
Part of the 1.0 Networking Foundations domain, which accounts for 20% of the 800-150 exam. Cisco does not publish an official question count, but from its 120-minute exam (~50–80 total, ~10–16 in this domain), expect 1–2 from this objective — we provide 16 practice questions to prepare you well beyond it. (estimate)
16questions here
4free pages
6concepts
20%of the exam
Questions 11–15
- 11
Which fiber optic cable type has a small core (typically 9 microns) and is designed for long-distance, high-bandwidth applications such as telecommunications backbones?
Select an answer first - 12
A technician is installing a fiber link inside a building between two floors. The distance is 150 meters (492 feet). The available fiber is OM2 multimode. The switches have SFP ports. Which transceiver should the technician use?
Select an answer first - 13
Which fiber optic connector is a small form-factor connector with a 1.25 mm ferrule and a push-pull latching mechanism, commonly used in high-density data center environments?
Select an answer first - 14
Which fiber optic connector uses a bayonet-style twist lock and a 2.5 mm ferrule, and was commonly used in older LAN and campus networks?
Select an answer first - 15
Which Ethernet standard operates at 100 Mbps over two pairs of Category 5 or higher UTP cable with a maximum segment length of 100 meters?
Select an answer first
Finished these 5 questions?
Review the revealed explanations, or continue through the curriculum.
Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Cisco. “800-150” is a trademark of its owner, used for identification only.