A company is designing a VXLAN EVPN fabric with a requirement to minimize the number of BGP sessions while maintaining high availability. Which design approach best meets this requirement?

Use a spine-and-leaf topology with iBGP EVPN and route reflectors on the spine switches

Use eBGP EVPN with each leaf peering with every other leaf

Use a full mesh of iBGP EVPN sessions between all leaf switches

Use a single BGP session between the two core switches

What type of BGP route is used in EVPN to advertise MAC address reachability information?

Route Type 3 (Inclusive Multicast Ethernet Tag)

Route Type 2 (MAC/IP Advertisement)

Route Type 1 (Ethernet Auto-Discovery)

An engineer is configuring VXLAN EVPN on a Nexus 9000 switch. They have created the VNI and mapped it to a VLAN. What is the next step to enable VXLAN forwarding on the NVE interface?

Associate the VNI with the NVE interface using the 'member vni' command

Create a VRF and associate the VNI with it

Configure the VNI under the VLAN interface

Enable VXLAN on the physical uplink interface

CiscoCertified Network Professional Data Center

Domain 1Objective 3

1.3 Apply Overlay Protocols Such as VXLAN EVPN 350-601 Practice Questions (Page 5)

Part of the Network domain, which accounts for 25% of the 350-601 exam. Cisco does not publish an official question count, but from its 120-minute exam (~50–80 total, ~13–20 in this domain), expect 1–2 from this objective — we provide 25 practice questions to prepare you well beyond it. (estimate)

25questions here

5free pages

5concepts

25%of the exam

Questions 21–25

21application · medium
A network engineer is verifying EVPN operation on a Nexus switch. They need to confirm that the switch is learning MAC addresses from remote VTEPs via BGP EVPN. Which command output would show this information?
Select an answer first
22expert · hard
A company is designing a VXLAN EVPN fabric with a requirement to minimize the number of BGP sessions while maintaining high availability. Which design approach best meets this requirement?
Select an answer first
23foundation · easy
Which show command is used to verify the MAC addresses learned over a VXLAN EVPN network on a Nexus switch?
Select an answer first
24foundation · easy
What type of BGP route is used in EVPN to advertise MAC address reachability information?
Select an answer first
25application · medium
An engineer is configuring VXLAN EVPN on a Nexus 9000 switch. They have created the VNI and mapped it to a VLAN. What is the next step to enable VXLAN forwarding on the NVE interface?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

No more pagesBack to 350-601

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Cisco. “350-601” is a trademark of its owner, used for identification only.

1.3 Apply Overlay Protocols Such as VXLAN EVPN 350-601 Practice Questions (Page 5)

Questions 21–25

A network engineer is verifying EVPN operation on a Nexus switch. They need to confirm that the switch is learning MAC addresses from remote VTEPs via BGP EVPN. Which command output would show this information?

A company is designing a VXLAN EVPN fabric with a requirement to minimize the number of BGP sessions while maintaining high availability. Which design approach best meets this requirement?

Which show command is used to verify the MAC addresses learned over a VXLAN EVPN network on a Nexus switch?

What type of BGP route is used in EVPN to advertise MAC address reachability information?

An engineer is configuring VXLAN EVPN on a Nexus 9000 switch. They have created the VNI and mapped it to a VLAN. What is the next step to enable VXLAN forwarding on the NVE interface?

Keep studying — Network