When troubleshooting a network issue, why might an engineer use conditional debugging in conjunction with SNMP monitoring?

To focus debug output on specific traffic while using SNMP to collect broader performance metrics

To replace SNMP with more detailed real-time data

To increase the security of the network by filtering debug output

To automatically fix the issue detected by SNMP

A network operations team is investigating a security breach. They suspect that a switch was accessed remotely and configuration changes were made. The switch has syslog configured to send messages to a central server, but the team is unsure if the syslog messages contain enough detail to identify the user who made the changes. Which additional configuration would provide the most useful information for the investigation?

Enable 'logging console' and 'logging monitor' on the switch.

Enable 'debug aaa authentication' on the switch.

Configure SNMP traps for configuration changes.

Configure 'logging userinfo' and ensure syslog is set to 'logging trap debugging'.

An organization is experiencing intermittent network slowdowns. The network team wants to identify which interfaces are experiencing high utilization or errors over time. They already have a syslog server collecting device logs. What should they add to proactively monitor interface statistics and detect anomalies?

Enable 'debug interface' on all routers to capture real-time utilization.

Configure SNMP traps and poll interface counters with an NMS.

Run continuous pings to each interface's IP address.

Increase syslog severity to 'debugging' on all devices.

A network administrator needs to troubleshoot a routing issue on a production router. The administrator suspects that a specific route is being incorrectly advertised by a neighbor. To avoid disrupting production traffic, which approach should the administrator take?

Use 'debug ip route 10.0.0.0/8' to filter debug output for the specific route.

Enable 'debug ip routing' globally and monitor the output.

Configure syslog to send all messages to the server for later analysis.

Run 'show ip route' repeatedly to observe changes.

CiscoCertified Network Professional Enterprise

Domain 4Objective 1

4.1 Diagnose Network Problems Using Such as Debugs, Conditional Debugs, Traceroute, Ping, SNMP, and Syslog 350-401 Practice Questions (Page 4)

Part of the 4.0 Network Assurance domain, which accounts for 10% of the 350-401 exam. Cisco does not publish an official question count, but from its 120-minute exam (~50–80 total, ~5–8 in this domain), expect 1–1 from this objective — we provide 30 practice questions to prepare you well beyond it. (estimate)

30questions here

6free pages

7concepts

10%of the exam

Questions 16–20

16foundation · easy
When troubleshooting a network issue, why might an engineer use conditional debugging in conjunction with SNMP monitoring?
Select an answer first
17expert · hard
A network operations team is investigating a security breach. They suspect that a switch was accessed remotely and configuration changes were made. The switch has syslog configured to send messages to a central server, but the team is unsure if the syslog messages contain enough detail to identify the user who made the changes. Which additional configuration would provide the most useful information for the investigation?
Select an answer first
18foundation · easy
A network engineer suspects that packets are being dropped at a specific router along the path to a destination. Which command is most appropriate to identify the path and locate the failure?
Select an answer first
19application · medium
An organization is experiencing intermittent network slowdowns. The network team wants to identify which interfaces are experiencing high utilization or errors over time. They already have a syslog server collecting device logs. What should they add to proactively monitor interface statistics and detect anomalies?
Select an answer first
20application · medium
A network administrator needs to troubleshoot a routing issue on a production router. The administrator suspects that a specific route is being incorrectly advertised by a neighbor. To avoid disrupting production traffic, which approach should the administrator take?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to 350-401

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Cisco. “350-401” is a trademark of its owner, used for identification only.

4.1 Diagnose Network Problems Using Such as Debugs, Conditional Debugs, Traceroute, Ping, SNMP, and Syslog 350-401 Practice Questions (Page 4)

Questions 16–20

When troubleshooting a network issue, why might an engineer use conditional debugging in conjunction with SNMP monitoring?

A network engineer suspects that packets are being dropped at a specific router along the path to a destination. Which command is most appropriate to identify the path and locate the failure?

A network administrator needs to troubleshoot a routing issue on a production router. The administrator suspects that a specific route is being incorrectly advertised by a neighbor. To avoid disrupting production traffic, which approach should the administrator take?

Keep studying — 4.0 Network Assurance