Users on the corporate SSID authenticate successfully but cannot reach the internet. ISE is used for RADIUS authentication and authorization. The WLC shows the clients in the 'RUN' state. What should the administrator investigate?

Check the RADIUS shared secret on the WLC

Confirm the SSID is broadcasting

Review the authorization policy in ISE for the returned VLAN or ACL

Verify the client's 802.1X supplicant settings

A manufacturing plant uses Cisco Catalyst Center for assurance. A specific area of the plant has clients with low health scores and frequent disconnects. Catalyst Center shows high retry rates and low SNR on the access point serving that area. What should the administrator do?

Increase the access point's transmit power

Change the client's security settings

Perform a site survey to identify sources of RF interference

Disable the 2.4 GHz radio on the access point

A bank uses ISE for 802.1X. A new group of users cannot authenticate, while existing users can. The WLC shows 'Authentication Failure' for the new users. What should the administrator check in ISE?

The identity store and group membership for the new users

A company's wireless network uses ISE for RADIUS authentication. Users report that authentication is slow, taking 10-15 seconds. ISE logs show successful authentication. What should the admin check?

The client's supplicant configuration

ISE's RADIUS response time and network latency between the WLC and ISE

CiscoCertified Network Professional Enterprise Wireless (ENWLSI)

Domain 7Objective 4

7.4 Troubleshoot Client Connectivity 300-430 Practice Questions (Page 1)

Part of the Monitoring domain, which accounts for 15% of the 300-430 exam. Cisco does not publish an official question count, but from its 90-minute exam (~35–60 total, ~5–9 in this domain), expect 1–2 from this objective — we provide 35 practice questions to prepare you well beyond it. (estimate)

35questions here

7free pages

3concepts

15%of the exam

Questions 1–5

1foundation · easy
A client successfully authenticates via 802.1X but is not placed in the expected VLAN. Which ISE function is responsible for determining the VLAN assignment for the client?
Select an answer first
2application · medium
Users on the corporate SSID authenticate successfully but cannot reach the internet. ISE is used for RADIUS authentication and authorization. The WLC shows the clients in the 'RUN' state. What should the administrator investigate?
Select an answer first
3application · medium
A manufacturing plant uses Cisco Catalyst Center for assurance. A specific area of the plant has clients with low health scores and frequent disconnects. Catalyst Center shows high retry rates and low SNR on the access point serving that area. What should the administrator do?
Select an answer first
4application · medium
A bank uses ISE for 802.1X. A new group of users cannot authenticate, while existing users can. The WLC shows 'Authentication Failure' for the new users. What should the administrator check in ISE?
Select an answer first
5application · medium
A company's wireless network uses ISE for RADIUS authentication. Users report that authentication is slow, taking 10-15 seconds. ISE logs show successful authentication. What should the admin check?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to 300-430

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Cisco. “300-430” is a trademark of its owner, used for identification only.