3.5 Implement Multicast Direct 300-430 Practice Questions (Page 4)

Questions 16–20

1. 16application · medium

   An administrator has enabled Multicast Direct on a WLC and wants to verify that it is working for a specific multicast group. Which command would show the multicast group members and the APs that are forwarding the traffic?

   • Ashow ap multicast direct summary
   • Bshow multicast group summary
   • Cshow wireless client summary
   • Dshow ap config general
   Reveal Solution Discussion Select an answer first
2. 17foundation · easy

   What is the primary purpose of Multicast Direct in a Cisco enterprise wireless network?

   • ATo convert multicast frames to unicast frames for each wireless client
   • BTo encrypt multicast traffic between the controller and the access points
   • CTo allow access points to forward multicast traffic directly to wireless clients without sending it to the controller
   • DTo prioritize multicast traffic over unicast traffic on the wireless medium
   Reveal Solution Discussion Select an answer first
4. 18foundation · easy

   Which statement correctly describes how Multicast Direct integrates with the wireless LAN controller and access points?

   • AThe controller and AP both forward multicast frames to clients in a load-balanced manner
   • BThe controller configures the AP to forward multicast frames directly, while the AP performs the actual forwarding
   • CThe controller must be in the data path for every multicast frame
   • DThe AP sends all multicast frames to the controller for replication to clients
   Reveal Solution Discussion Select an answer first
5. 19foundation · easy

   How does Multicast Direct handle multicast traffic for wireless clients on the same VLAN?

   • AThe AP forwards the multicast frames directly to the wireless clients
   • BThe AP converts multicast frames to unicast and sends them to each client
   • CThe controller sends the multicast frames to the AP only if a client has joined the group
   • DThe controller replicates the multicast frames to each AP over CAPWAP
   Reveal Solution Discussion Select an answer first
6. 20application · medium

   An administrator has enabled Multicast Direct on a WLC and wants to verify that multicast traffic is being converted to unicast for wireless clients. Which command or action would provide the most direct evidence of this operation?

   • ARun 'show ap multicast direct summary' on the WLC.
   • BRun 'show wireless client summary' and look for multicast group memberships.
   • CCheck the AP's radio statistics for multicast frame counters.
   • DCapture packets on the wired side of the AP and look for unicast frames.
   Reveal Solution Discussion Select an answer first